Electrical Motor Installation Details

Here you will learn about Electrical Motor Installation Details, Belowground Motor Installation Details, Above Ground Motor Installation Details.

BELOWGROUND MOTOR INSTALLATION DETAILS

ARMOR CABLE – LOW VOLTAGE SEPARATE POWER AND CONTROL STEEL WIRE CLASS 1, DIVISION 2 OR UNCLASSIFIED

MV SEPARATE POWER AND CONTROL-STEEL WIRE CLASS 1, DIVISION 2 OR UNCLASSIFIED ARMOR CABLE

MOTOR ACCESSORY BOX CONNECTION COMBINED WITH CONTROL WIRES-STEEL WIRE ARMOR CABLE CLASS 1, DIVISION 2 OR UNCLASSIFIED

POWER ONLY STEEL WIRE ARMOR CABLE CLASS 1, DIVISION 2 OR UNCLASSIFIED

CONTROL STATION SUPPORT LOCATION PLAN BELOWGROUND FEED

RTD AND ACCESSORY TERMINAL BOX CONNECTIONS – FOR 4kV MOTORS-STEEL WIRE ARMOR CABLE CLASS1, DIVISION 2 OR UNCLASSIFIED

SEPARATE POWER AND CONTROL-STEEL WIRE ARMOR CABLE 5kV MOTORS CLASS 1, DIVISION 2 OR UNCLASSIFIED

SEPARATE POWER AND CONTROL – STEEL CONDUIT CLASS 1, DIVISION 2 OR UNCLASSIFIED

MOTOR ACCESSORY BOX CONNECTION COMBINED WITH CONTROL WIRES-STEEL CONDUIT CLASS 1, DIVISION 2 OR UNCLASSIFIED

POWER ONLY STEEL CONDUIT CLASS 1, DIVISION 2 OR UNCLASSIFIED

RTD AND ACCESSORY TERMINAL BOX CONNECTIONS FOR 5kV MOTORS-STEEL CONDUIT CLASS 1, DIVISION 2 OR UNCLASSIFIED

SEPARATE POWER AND CONTROL STEEL CONDUIT 5kV MOTORS CLASS 1, DIVISION 2 OR UNCLASSIFIED

ABOVE GROUND MOTOR INSTALLATION DETAILS

WIRE ARMOR CABLE LOW VOLTAGE SEPARATE POWER AND CONTROL – STEEL CLASS 1 , DIVISION 2 OR UNCLASSIFIED.

CLASS 1 , DIVISION 2 OR UNCLASSIFIED. MV SEPARATE POWER AND CTRL. – STEEL WIRE ARMOR CABLE

LOW VOLTAGE MOTOR ACCESSORY BOX CONNECTION COMBINED WITH CONTROL WIRES – STEEL CONDUIT CLASS 1 , DIVISION 2 OR UNCLASSIFIED.

MV POWER ONLY- STEEL WIRE ARMOR CABLE CLASS 1 , DIVISION 2 OR UNCLASSIFIED.

460V MOTORS AND BELOW MOTOR TERMINATION ASSEMBLY

NOTES:

1. INSTALLATION INSTRUCTIONS:
A. FOLLOW MANUFACTURERS INSTRUCTIONS WHEN FURNISHED WITH MOTOR CONNECTION KIT.
B. ALL MECHANICAL CONNECTIONS TO BE CLEAN AND TIGHT.
C. REMOVE ALL SHARP EDGES FROM CONNECTIONS BEFORE INSTALLING TUBING.
D. INSTALL HEAT SHRINKABLE TUBING AROUND LUGS AND HEAT AS INSTRUCTED.

2. GROUND WIRE, SIZED PER NEC TABLE 250-122, TO MOTOR BASE GROUND AND/OR OTHER GROUND LUG TABS.

5kV MOTORS AND ABOVE MOTOR TERMINATION ASSEMBLY

MOTORS STEEL WIRE ARMOR CABLE RTD AND ACCESSORY TERMINAL BOX CONNECTIONS FOR 5KV CLASS 1, DIVISION 2 OR UNCLASSIFIED

COMBINED POWER AND CONTROL STEEL CONDUIT CLASS 1, DIVISION 2 OR UNCLASSIFIED