Any body has idea for boost converter. Actually, I need to connect pulser from flow meter whose output pulses are 5V where as the controller works on 12V. Any idea or piece of equipme t that I can put between pulser and controller for 5V to 12V conversion. ?
- As a quick solution to this problem, you may use a 5V interposing relay and a 12 V power supply connected to its NO Auxiliary contacts. So whenever your flowmeter such as a Vortex generates pulses then they may be step up on the aux side. Do check the switching time of the relay and pulses frequency in this case.
- Other Solution is The best way to boost is you need SCR relay in between along with 12vdc power supply that you could biased on PLC input.
- One more found 1 relay finder model to solve this issue.
- Solid state relay with following specification.
- No contact ; 6V input..(4.8V – 6.6V)..output switching 1.5 to 33V Dc