Integrated Automation System References and Standards
-
- The latest published edition of a reference shall be applicable to this Project unless identified by a specific edition date.
- All reference amendments adopted prior to the effective date of this Contract shall be applicable to this Project.
- All materials, installation and workmanship shall comply with the applicable requirements and standards addressed within the following references: <edit the following list as required>
- <American Society of Heating, Refrigeration and Air Conditioning Engineers (ASHRAE)
- American National Standards Institute (ANSI)
- American Society of Mechanical Engineers (ASME)
- American Society for Testing and Materials (ASTM)
- American Refrigeration Institute (ARI)
- EIA-709.1-A-99: Control Network Protocol Specification
- EIA-709.3-99: Free-Topology Twisted-Pair Channel Specification
- EIA-232: Interface between Data Terminal Equipment and Data Circuit-Terminating Equipment Employing Serial Binary Data Interchange
- EIA-458: Standard Optical Fiber Material Classes and Preferred Sizes
- EIA-485: Standard for Electrical Characteristics of Generator and Receivers for use in Balanced Digital Multipoint Systems
- EIA-472: General and Sectional Specifications for Fiber Optic Cable
- EIA-475: Generic and Sectional Specifications for Fiber Optic Connectors and all Sectional Specifications
- EIA-573: Generic and Sectional Specifications for Field Portable Polishing Device for Preparation Optical Fiber and all Sectional Specifications
- EIA-590: Standard for Physical Location and Protection of Below-Ground Fiber Optic Cable Plant and all Sectional Specifications
- UL 916: Energy Management Systems
- NEMA 250: Enclosure for Electrical Equipment
- NEMA ICS 1: General Standards for Industrial Controls
- NFPA 90A “Standard for the Installation of Air Conditioning and Ventilating Systems” where applicable to controls and control sequences
- NFPA 70 National Electrical Code (NEC)
- Instrument Society of America (ISA)
- IEEE 142: Recommended Practice for Grounding of Industrial and Commercial Power Systems
- IEEE 802.3: CSMA/CD (Ethernet – Based) LAN
- IEEE 519: Recommended Practices and Requirements for Harmonic Control in Electric Power Systems
- Joint Industrial Council (JIC)
- LonMark International
- BACnet Testing Lab
- Occupational Safety and Health Act (OSHA)
- Federal Communications Commission Parts 15 and 16>
Integrated Automation System Work Execution Procedure