Switch Valves, Solenoid Valves and Limit Switches Commissioning Checklist

This article is about Switch Valves, TSA, and PSA Valves Commissioning Checklist, Switch Valves Commissioning Checklist, Solenoid Valves and Limit Switches Commissioning Checklist.

Switch Valves Commissioning Checklist:

  • Valve nameplate verified per specification sheet.
  • Valve in correct physical location.
  • Correct flow direction.
  • Lubricator/filter piping installed to drawing.
  • Operator correctly orientated.
  • Accessible for maintenance.
  • Accessible for removal.
  • Air supply provided. Set at correct pressure. Blown down.
  • Actuator fail position correct.

Solenoid Valves and Limit Switches Commissioning Checklist

  • Correct orientation.
  • Wiring checked:
    • – Correct
    • – Continuity
    • – Insulation
  • Connection to solenoid coil strain relieved.
  • Explosion-proof requirement checked.
  • Limit switch coupling/cam set-screws tight.
  • Limit switch cams lubricated.

Leave a Comment

error: Content is Protected.