Painting Question & Answers

This article is about the PAINTING EXAMINATION QUESTIONS AND ANSWERS. Here you will see the best question which is normally asked during interview of Painting engineer, supervisor or QC.

PAINTING EXAMINATION QUESTIONS

Standard Codes related Questions

1. What documents explains how to measure dry film thickness with magnetic gages?
   1. SSPC-PA1
   2. SSPC-PA2
   3. SSPC-PA3
   4. SSPC-PA4
2. What documents will describe the health and safety of hazard of a coating material?
   1. The job specification
   2. Material safety data sheets
   3. SSPC safety specification
   4. OSHA Standard
3. What is the corresponding surface preparation specification of SSPC-SP-6 to ASTM D220?
   1. Sa3
   2. Sa 2-1/2
   3. Sa2
4. What is the correct storage temperature range for coating?
   1. 30 to 90 F
   2. 40 to 120 F
   3. 45 to 100 F
   4. The storage temperature range will vary with different coatings. So it is necessary to check the product data sheets of the coating.
5. What documents will answer your questions about the kind of thinner required for special coating?
   1. Material Safety data sheets
   2. SSPC paint specification
   3. Product data sheets
   4. Job specification
6. If you need to answer a question about the surface profile requirement for blasted surfaces on a job, what document would you consult?
   1. Material Safety Data Sheet
   2. SSPC Specification
   3. Job Specification
   4. SSPC-PA1
7. At least 95% of each square inch of surface area shall be free of visible residues?
   1. SSPC-SP-10
   2. Near White
   3. Both a and b
8. What document will answer your questions about the kind of thinner required for a specific coating?
   1. Material safety data sheet
   2. SSPC paint specifications
   3. Product data sheets
   4. Job specifications
9. Paint shall not be applied when the temperature is expected to drop to 32°F
   1. True
   2. False
10. The inspection shall be conducted prior to, during and after application of the coating system.
    1. ASTM D3276-86
    2. ASTM D3358-88
    3. ASTM D3363-74
11. It is the temperature at which the air starts to crystallize to form as liquid or the temperature at which moisture will condense.
    1. Dew point
    2. Humidity
    3. Ambient temperature
12. Standard test method for measuring adhesion by the tape test.
    1. ASTM D 3359
    2. ASTM D 3363
    3. ASTM D 3350
13. What is the meaning of SSPC?
    1. Structural Steel Painting Commission
    2. Steel Surface Painting Council
    3. Steel Structures Painting Council
14. What documents will describe the health & safety hazards of coating materials?
    1. The job specification
    2. Material safety data sheets
    3. SSPC safety specification
    4. OSHA standard
15. Surface preparation for power tool cleaning
    1. SSPC-SP10
    2. SSPC-SP3
    3. SSPC-SP2