ACI Standards List for Civil Engineering International Standards

ACI Standards List for Civil Engineering International Standards

 

  1. 104 – 71 Preparation of Notation for Concrete.
  2. 116R – 90 Cement and Concrete Terminology.
  3. 117R – 90 Standard Specifications for Tolerences for Concrete Construction and Materials.
  4. 121R – 98 Quality Management System for Concrete Construction.
  5. 124.2R – 94 Slide Module.
  6. 126.1R – 97 Guide to a Recommanded Format for the Identification of Concrete in a Materials Property Database.
  7. 201.2R – 92 Guide to Durable Concrete.
  8. 207.1R – 96 Mass Concrete.
  9. 207.2R – 95 Effect of Restraint , Volume Change and Reinforcement on Cracking of Mass Concrete.
  10. 207.3R – 94 Practices for Evalution of Concrete in Existing Massive Structures for Service Conditions.
  11. 207.4R – 93 Cooling and Insulationg Systems for Mass Concrete.
  12. 207.5R – 93 Roller Compacted Mass Concrete.
  13. 209R – 92 rediction of Creep , Shirnkage and Temperature Effectes in Concrete Structures.
  14. 210.1R – 94 Compendium of Case Histories on Repair of Erosion – Damaged Concrete in Hydraulic Structures.
  15. 210R – 93 Errosion of Concrete in Hydraulic Structures.
  16. 211.1 – 91 Standard practise for Selecting Propotions for Normal Heavyweight and Mass Concrete.
  17. 211.2 – 98 Standard practise for Selecting Propotions for Structural Lightweight Concrete.
  18. 211.3R – 97 Guide for Selecting Propotions for No – Slump Concrete.
  19. 211.4R – 93 Guide for Selecting Propotions for High Strength Concrete with Portland Cement and Flyash.
  20. 211.5R – 96 Guide for Submittal of Concrete Proportions.
  21. 212.3R – 91 Chemical Admixtures for concrete.
  22. 212.4R – 93 Guide for the Use of High – Range Water – Reduceing Admixtures ( Superplastizers ) in Concrete.
  23. 213R – 87 Guide for Structural Lightweight Aggregate Concrete.
  24. 214.3R – 88 Simplified Version of the Recommended Practice for Evaluation of Strength Test Results of Concrete.
  25. 214 – 77 Recommended Practice for Evaluation of Strength Test Results of Concrete.
  26. 215R – 74 Considerations for Design of Concrete Structures Subjected to Fatigue Loading.
  27. 216.1 – 97 Standard Method for Determining Fire Resistance of Concrete and masonary Construction Assemblies.
  28. 216 H – 89 Guide for Determining the Fire Endurance of Concrete Elements.
  29. 221.1R – 98 State – of – the Art Report on Alkali – Aggregate Reactivity.
  30. 221r – 96 Guide for Use of Normal Weight and Heavyweight Aggregates in Concrete.
  31. 222.1 – 96 Provisional Standard Test Method for Water – Soluble Chloride Avilable for Corrosion of Embedded Steel in Mortar and Concrete Using the Soxhlet Extractor.
  32. 22R – 96 Corrision of Metals in Concrete.
  33. 223 – 98 Standard Practice for the Use of Shirkage – Compensating Concrete.
  34. 224 .1R – 93 Causes , Evaluation and Repair of Cracks in Concrete Structures.
  35. 224.2R – 92 Cracking of Concrete Members in Direct Tension.
  36. 224.3R – 95 Joints in Concrete Construction.
  37. 224R – 90 Control of Cracking in Concrete Structures.
  38. 225R – 91 Guide to the Seletion and Use of Hydraulic Cements.
  39. 228.1R – 95 In – Place Methods to Estimate Concrete Styrength.
  40. 228.2R – 98 Nondestructive Test method for Evaluation of Concrete In Stru.
  41. 229.R – 94 Controlled Low Strength Materials ( CLSM ).
  42. 230.1R – 90 State of the Art Report on Soil Cement.
  43. 232.1R – 94 Use of Natural Pozzolans in Concrete.
  44. 232.2R – 96 Use of Fly Ash in Concrete.
  45. 234.R – 96 Guide for the Use of Silica Fume in Concrete.
  46. 301 – 96 Standard Specifications for Structural Concrete.
  47. 302.1R – 96 Guide for Concrete Floor and Slab Construction.
  48. 303.1 – 97 Standard Specification for Cast – In – Place Architectural Concrete.
  49. 304.1R – 92 Guide for the Use of Preplaced Aggregate Concrete for Structural and Mass Concrete Applications.
  50. 304.2R – 96 Placing Concrete by Pumping Methods.
  51. 304.3R – 96 Heavyweight Concrete : Measuring, Mixing , Transporting and Placing.
  52. 304.4R – 95 Placing Concrete with Belt Conveyors.
  53. 304.5R – 91 Batching , Mixing, and Job Control of Lightweight Concrete.
  54. 304.6R – 91 Guide for the Use of Volumetric – Measuring and Continuous – Mixing Concrete Equipment.
  55. 304R – 89 Guide for Measuring, Mixing, Transporting, and Placing Concrete.
  56. 305R – 91 Hot Weather Concreting.
  57. 306.1 – 90 Standard Specification for Cold Weather Concreting.
  58. 306R – 88 Cold Weather Concreting.
  59. 307 – 95 Standard Practice for the Design and Construction of Reinforced Concrete Chimneys.
  60. 307 – 98 Design and Construction of Reinforced Concrete Chimneys.
  61. 307R – 95 Commentary on Standard Practice for the Design and Construction of Reinforced Concrete Chimneys.
  62. 307R – 98 Commentary on Standard Practice for the Design and Construction of Reinforced Concrete Chimneys .
  63. 308.1 – 98 Standard Specification for Curing Concrete.
  64. 308 – 92 Standard Practice for Curing Concrete.
  65. 309.1R – 93 Behavior of Fresh Concrete During Vibration.
  66. 309.2R – 90 Identification and Control of Consolidation Related Surface Defects.
  67. 309.2R – 98 Identification and Control of Visible Effects of Consolidation on Formed Concrete Surfaces.
  68. 309.3R – 92 Guide to Consolidation of Concrete in Congested Areas.
  69. 309R – 96 Guide for Consolidation of Concrete.
  70. 311.1R – 92 ACI Manual of Concrete Inspection.
  71. 311.1R – 98 ACI Manual of Concrete Inspection.
  72. 311.4R – 95 Guide for Concrete Inspection.
  73. 311.5R – 97 Guide for Concrete Plant Inspection and Field Testing of Ready-Mixed Concrete ***** ( Technician Certificates ).
  74. 313 – 97 Std. Practice for Design and Construction of Concrete Silos and Stacking Tubes for Storing Granular Materilas.
  75. 313R – 97 Commentary on Std. Practice for Design and Construction of Concrete Silos and Stacking Tubes for Storing Granular Materilas.
  76. 315 – 92 Details and Detailing of Concrete Reinforcement.
  77. 315R – 94 Manual of Engineering and Placing Drawings for Reinforced Concrete Structures.
  78. 318 – 95 & 318R – 95 Building Code Requirments for Structural Concrete & Commentary.
  79. 318M – 95 & 318RM – 95 Building Code Requirments for Structural Concrete & Commentary.
  80. 318M – CC Code Case ,325.3R – 85 Guide for Design of Foundations and Shoulders for Concrete Pavements.
  81. 325.6R – 88 Texturing Concrete Pavements.
  82. 325.9R – 91 Guide for Construction of Concrete Pavements and Concrete Bases.
  83. 325.10R – 95 State of the Art Report on Roller Compacted Concrete Pavments.
  84. 330.1 – 94 Standard Specification for Plain Concrete Parking Lots.
  85. 330R – 92 Guide for Design and Construction of Concrete Parking Lots.
  86. 332 R – 84 Guide to Residential Cast – in Place Concrete Construction.
  87. 334.1R – 92 Concrete Shell Structures Practice and Commentary.
  88. 334.2R – 91 Reinforced Concrete Cooling Tower Shells – Practice and Commentary.
  89. 336.1 – 94 Standard Specification for the Construction of Drilled Piers.
  90. 336.1 & 336.1R – 98 Reference Spec. For the Construction of Drilled Piers and Commentary.
  91. 336.2R – 88 Suggested Analysis and Design Procedures for Combined Footings and Mats.
  92. 336.3R – 93 Design and Construction of Drilled Piers.
  93. 40.R – 97 ACI Design Handbook – Design of Structural Reinforced Concrete Elements in Accordance with the Strength Design Method of ACI 318 – 95.
  94. 341.2R – 97 Seismic Analysis and Design of Concrete Bridge System. 
  95. 343R – 95 Analysis and Design of Reinforced Concrete Bridge Structures.
  96. 345.1R – 92 Routine Maintenance of Concrete Bridges. 
  97. 345.2R – 92 Guide for Widening Highway Bridges,
  98. 345.2R – 98 Guide for Widening Highway Bridges.
  99. 345R – 91 Guide for Concrete Highway Bridge Deck Construction.
  100. 346 – 90 Std. Specification for Cast – in – Place Nonreinforced Concrete Pipe.
  101. 346R – 90 Recommendation for Cast – in – Place Nonreinforced Concrete Pipe.
  102. 347R – 94 Guide to Formwork for Concrete.
  103. 349.1R – 91 Reinforced Concre Design for Thermal Effects on Nuclear Power Plant Structures.
  104. 349. 2R – 97 Embedment Design Examples.
  105. 349.3R – 96 Evaluation of Existing Nuclear Safety – Related Concrete Structures.
  106. 349 – 97 Code Requirments for Nuclear Safety Related Concrete Structures.
  107. 349R – 97 Commentary on Code Requirments for Nuclear Safety Related Concrete Structures.
  108. 350.1R – 93 Testing Reinforced Concrete Structures for Watertightness.
  109. 350.2R – 97 Concrete Structures for Containment of Hazardous Materials.
  110. 350R – 89 Environmental Engineering Concrete Structures.
  111. 351.1R – 93 Grouting for Support of Equipment and Machinery.
  112. 351.2R – 94 Foundations for Static Equipment.
  113. 352.1R – 89 Recommendations for Design of Slab – Column Connections in Monolithic Reinforced Concrete Structures.
  114. 352R – 91 Recommendations for Design of Beam – Column Joints in Monolithic Reinforced Concrete Structures.
  115. 355.1R – 91 State of the Art Report on Anchorage to Concrete.
  116. 355.1R – 91 State of the Art Report on Anchorage to Conncrete ( Re Approved 1997 ).
  117. 357.1R – 91 State of the Art Report on offshore Concrete Structures for the Arctic.
  118. 357.2R – 88 State of the Art Report on Barge – Like Concrete Structures.
  119. 357R – 84 Guide for the Design and Construction of Fixed Offshore Concrete Structures.
  120. 358.1R – 92 Analysis and Design of Reinforced and Prestressed – Concrete guideway Structures.
  121. 359 – 92 Code for Concrete Reactor Vessels and Containments,360R – 92 Design of Slabs on Grade.
  122. 362.1R – 97 Guide for the Design of Durable Parking Structures,
  123. 363.2R – 98 Guide to Quality Control and Testing of High – Strength Concrete.
  124. 363R – 92 State of the Art Report on High Strength Concrete.
  125. 364.1R – 94 Guide for Evaluation of Concrete Structures Prior to Rehabilitation.
  126. 371R – 98 Guide for the Analysis, Design, and Construction of Concrete – Pedestal Water Towers.
  127. 372R – 97 Design and Construction of Circular Wire – and Strand – Wrapped Prestressed Concrete Structures.
  128. 373R – 97 Design and Construction of Circular Prestressed Concrete Structures with Circumferential Tendons.
  129. 408.2R – 92 State of the Art Report : Bond Under Cyclic Loads.
  130. 421.1R – 92 Shear Reinforcement for Slabs.
  131. 423.3R – 96 Recommendations for Concrete Members Prestressed with Unbonded Tendons.
  132. 423.4R – 98 Corrosion and Repair of Unbonded Single Strand Tendons.
  133. 435.7R – 85 State of the Art Report on Temperature – Induced Deflections of Reinforced Concrete Members.
  134. 435.8R – 85 Observed Deflections of Reinforced Concrete Slab Systems, and Causes of Large Deflections.
  135. 435R – 95 Control of Deflection in Concrete Structures.
  136. 437R – 91 Strength Evaluation of Existing Concrete Buildings.
  137. 439.3R – 91 Mechanical Connections of Reinforceing Bars.
  138. 40R – 96 State of the Art Report on Fiber Reinforced Plastic ( FRP ) Reinforcement for Concrete Structures.
  139. 441R – 96 High – Strength Concrete Columns : State of the Art.
  140. 446.1R – 91 Fracture Mechanics of Concrete : Concepts , Models and Determination of Material Properties.
  141. 446.3R – 97 Finite Element Analysis in Concrete Structures : State of the Art.
  142. 503.1 – 92 Standard Specification for Bonding Hardened Concrete, Steel, Wood , Brick and other Materials to Hardened Concrete with a Multi – Component Epoxy Adhesive.
  143. 503.2 – 92 Standard Specification for Bonding Plastic Concrete to Hardened Concrete with a Multi – Component Epoxy Adhesive.
  144. 503.3 – 92 Standard Specification for Producing a Skid – Resistant surface on concrete by the use of a Multi – Component Epoxy Adhesive.
  145. 503.4 – 92 Standard Specifications for Repairing Concrete with Epoxy Mortars.
  146. 503.5R – 92 Guide for the Seletion of Polymer Adhesieve with Concrete.
  147. 503.6R – 97 Guide for the Application of Epoxy and Latex Adhesives for Bonding Freshly Mixed and Hardened Concrete.
  148. 503R – 93 Use of Epoxy Compounds with Concrete.
  149. 504R – 90 Guide to Sealing Joints in Concrete Structures.
  150. 506.1R – 98 Committee Report on Fiber Reinforced Shotcrete.
  151. 506.2 – 95 Specification for Shotcrete.
  152. 506.3R – 91 Guide to Certification of Shotcrete Nozzlemen.
  153. 506.3R – 91 Guide to Certification of Shotcrete Nozzlemen.
  154. 506.4R – 94 Guide for the Evaluation of Shotcrete.
  155. 506R – 90 Guide to Shotcrete.
  156. 515.1R – 79 A Guide to the Use of Waterproofing , Dampproofing, Protective, and Decorative Barrier Systems for Concrete.
  157. 523.1R – 92 Guide for Cast – in – Place Low – Density Concrete.
  158. 523.2R – 96 Guide for Precast Cellular Concrete Floor, Roof and Wall Units.
  159. 523.3R – 93 Guide for Cellular Concretes Above 50 pcf , and for Aggregate Concretes Above 50 pcf with compressive strength less than 2500 psi.
  160. 524R – 93 Guide to Portland Cement Plastering.
  161. 530.1 – 95 Specification for Masonary Structures ( ASCE 6 – 95 / TMS 602 – 95 ).
  162. 530.1R – 95 Commentary on Specification for Masonary Structures ( ASCE 6 – 95 / TMS 602 – 95 ).
  163. 530 – 95 Building Code Requirments for Masonary Structures.
  164. 530R – 95 Commentary on Building Code Requirments for Masonary Structures.
  165. 533R – 93 Guide for Precast Concrete Wall Panels.
  166. 544.1R – 96 State of the Art Report on Fiber Reinforced Concrete.
  167. 544.2R – 89 Measurments of Properties of Fiber Reinforced Concrete.
  168. 544. 3R – 93 Guide for Specifying , Proportioning, Mixing, Placing and Finishing Fiber Reinfoced Concrete.
  169. 544 . 4R – 88 Design Considerations for Steel Fiber Reinforced Concrete.
  170. 546.1R – 80 Guide for Repair of Concrete Bridge Superstructures.
  171. 546.2R – 98 Guide to Underwear Repair of Concrete.
  172. 546R – 96 Concrete Repair Guide.
  173. 547.1R – 89 State of the Art Report Refractory Plastics and Ramming Mixes.
  174. 547R – 79 Refractory Concrete : Abstract of State of the Art Report.
  175. 548.1R – 97 Guide for the Use of Polymers in Concrete.
  176. 548.2R – 93 Guide for Mixing and Placing Sulfur Concrete in Construction.
  177. 548.3R – 95 State of the Art Report on Polymer – Modified Concrete.
  178. 548.4 – 93 Standard Specification for Latex – Modified Concrete ( LMC ) overlays.
  179. 548.5R – 94 Guide for Polymer Concrete Overlays.
  180. 548.6R – 96 Polymer Concrete – Structural Applications Stat of the Art Report. 
  181. 124.1R – 92 Esthetics in Concrete ( Slide Module S. 01 – 92 ).
  182. 124.2R – 92 The Mercer Mile Building ( Slide Module S. 02 – 94 ).
  183. 126.1R – 97 Guide to a Recommanded Format for the Identification of Concrete in a Materials Property Database.
  184. 201.1R – 92 Guide for Making a Condition Survey of Concrete in Service.
  185. 201.2R – 92 Guide to Durable Concrete,207.1R – 96 Mass Concrete.
  186. 207.2R – 95 Effect of Restraint , Volume Change and Reinforcement on Cracking of Mass Concrete.
  187. 207.3R – 94 Practices for Evalution of Concrete in Existing Massive Structures for Service Conditions.
  188. 207.4R – 93 Cooling and Insulationg Systems for Mass Concrete.
  189. 207.5R – 93 Roller Compacted Mass Concrete.
  190. 210.1R – 94 Compendium of Case Histories on Repair of Erosion – Damaged Concrete in Hydraulic Structures.
  191. 211.1 – 91 Standard practise for Selecting Propotions for Normal Heavyweight and Mass Concrete.
  192. 211.2 – 98 Standard practise for Selecting Propotions for Structural Lightweight Concrete.
  193. 211.3R – 97 Guide for Selecting Propotions for No – Slump Concrete.
  194. 211.4R – 93 Guide for Selecting Propotions for High Strength Concrete with Portland Cement and Flyash.
  195. 211.5R – 96 Guide for Submittal of Concrete Proportions.
  196. 212.3R – 91 Chemical Admixtures for concrete.
  197. 212.4R – 93 Guide for the Use of High – Range Water – Reduceing Admixtures ( Superplastizers ) in Concrete.
  198. 214.3R – 88 Simplified Version of the Recommended Practice for Evaluation of Strength Test Results of Concrete.
  199. 216.1 – 97 Standard Method for Determining Fire Resistance of Concrete and masonary Construction Assemblies.
  200. 221.1R – 98 State – of – the Art Report on Alkali – Aggregate Reactivity.
  201. 22.1 – 96 Provisional Standard Test Method for Water – Soluble Chloride Avilable for Corrosion of Embedded Steel in Mortar and Concrete Using the Soxhlet Extractor.
  202. 224 .1R – 93 Causes , Evaluation and Repair of Cracks in Concrete Structures.
  203. 224.2R – 92 Cracking of Concrete Members in Direct Tension.
  204. 224.3R – 95 Joints in Concrete Construction.
  205. 228.1R – 95 In – Place Methods to Estimate Concrete Styrength.
  206. 228.2R – 98 Nondestructive Test method for Evaluation of Concrete In Stru.
  207. 230.1R – 90 State of the Art Report on Soil Cement.
  208. 232.1R – 94 Use of Natural Pozzolans in Concrete.
  209. 232.2R – 96 Use of Fly Ash in Concrete.
  210. 302.1R – 96 Guide for Concrete Floor and Slab Construction.
  211. 303.1 – 97 Standard Specification for Cast – In – Place Architectural Concrete.
  212. 304.1R – 92 Guide for the Use of Preplaced Aggregate Concrete for Structural and Mass Concrete Applications.
  213. 304.2R – 96 Placing Concrete by Pumping Methods.
  214. 304.3R – 96 Heavyweight Concrete : Measuring, Mixing , Transporting and Placing.
  215. 304.4R – 95 Placing Concrete with Belt Conveyors.
  216. 304.5R – 91 Batching , Mixing, and Job Control of Lightweight Concrete.
  217. 304.6R – 91 Guide for the Use of Volumetric – Measuring and Continuous – Mixing Concrete Equipment.
  218. 306.1 – 90 Standard Specification for Cold Weather Concreting.
  219. 308.1 – 98 Standard Specification for Curing Concrete.
  220. 309.1R – 93 Behavior of Fresh Concrete During Vibration.
  221. 309.2R – 90 Identification and Control of Consolidation Related Surface Defects.
  222. 309.2R – 98 Identification and Control of Visible Effects of Consolidation on Formed Concrete Surfaces.
  223. 309.3R – 92 Guide to Consolidation of Concrete in Congested Areas.
  224. 311.1R – 92 ACI Manual of Concrete Inspection.
  225. 311.1R – 98 ACI Manual of Concrete Inspection.
  226. 311.4R – 95 Guide for Concrete Inspection.
  227. 311.5R – 97 Guide for Concrete Plant Inspection and Field Testing of Ready-Mixed Concrete.
  228. 325.3R – 85 Guide for Design of Foundations and Shoulders for Concrete Pavements.
  229. 325.6R – 88 Texturing Concrete Pavements.
  230. 325.9R – 91 Guide for Construction of Concrete Pavements and Concrete Bases.
  231. 330.1 – 94 Standard Specification for Plain Concrete Parking Lots.
  232. 334.1R – 92 Concrete Shell Structures Practice and Commentary.
  233. 334.2R – 91 Reinforced Concrete Cooling Tower Shells – Practice and Commentary.
  234. 336.1 – 94 Standard Specification for the Construction of Drilled Piers.
  235. 336.1 & 336.1R – 98 Reference Spec. For the Construction of Drilled Piers and Commentary.
  236. 336.2R – 88 Suggested Analysis and Design Procedures for Combined Footings and Mats.
  237. 336.3R – 93 Design and Construction of Drilled Piers.
  238. 341.2R – 97 Seismic Analysis and Design of Concrete Bridge System.
  239. 345.1R – 92 Routine Maintenance of Concrete Bridges.
  240. 345.2R – 92 Guide for Widening Highway Bridges.
  241. 345.2R – 98 Guide for Widening Highway Bridges.
  242. 349.1R – 91 Reinforced Concre Design for Thermal Effects on Nuclear Power Plant Structures.
  243. 349.2R – 97 Embedment Design Examples.
  244. 349.3R – 96 Evaluation of Existing Nuclear Safety – Related Concrete Structures.
  245. 350.1R – 93 Testing Reinforced Concrete Structures for Watertightness.
  246. 350.2R – 97 Concrete Structures for Containment of Hazardous Materials.
  247. 351.1R – 93 Grouting for Support of Equipment and Machinery.
  248. 351.2R – 94 Foundations for Static Equipment.
  249. 352.1R – 89 Recommendations for Design of Slab – Column Connections in Monolithic Reinforced Concrete Structures.
  250. 355.1R – 91 State of the Art Report on Anchorage to Concrete.
  251. 355.1R – 91 State of the Art Report on Anchorage to Conncrete ( Re Approved 1997 ).
  252. 357.1R – 91 State of the Art Report on offshore Concrete Structures for the Arctic.
  253. 357.2R – 88 State of the Art Report on Barge – Like Concrete Structures .
  254. 358.1R – 92 Analysis and Design of Reinforced and Prestressed – Concrete guideway Structures.
  255. 362.1R – 97 Guide for the Design of Durable Parking Structures.
  256. 363.2R – 98 Guide to Quality Control and Testing of High – Strength Concrete.
  257. 364.1R – 94 Guide for Evaluation of Concrete Structures Prior to Rehabilitation.
  258. 408.2R – 92 State of the Art Report : Bond Under Cyclic Loads.
  259. 421.1R – 92 Shear Reinforcement for Slabs.
  260. 423.3R – 96 Recommendations for Concrete Members Prestressed with Unbonded Tendons.
  261. 423.4R – 98 Corrosion and Repair of Unbonded Single Strand Tendons.
  262. 435.7R – 85 State of the Art Report on Temperature – Induced Deflections of Reinforced Concrete Members.
  263. 435.8R – 85 Observed Deflections of Reinforced Concrete Slab Systems, and Causes of Large Deflections.
  264. 439.3R – 91 Mechanical Connections of Reinforceing Bars.
  265. 446.1R – 91 Fracture Mechanics of Concrete : Concepts , Models and Determination of Material Properties.
  266. 446.3R – 97 Finite Element Analysis in Concrete Structures : State of the Art.
  267. 503.1 – 92 Standard Specification for Bonding Hardened Concrete, Steel, Wood , Brick and other Materials to Hardened Concrete with a Multi – Component Epoxy Adhesive.
  268. 503.2 – 92 Standard Specification for Bonding Plastic Concrete to Hardened Concrete with a Multi – Component Epoxy Adhesive.
  269. 503.3 – 92 Standard Specification for Producing a Skid – Resistant surface on concrete by the use of a Multi – Component Epoxy Adhesive.
  270. 503.4 – 92 Standard Specifications for Repairing Concrete with Epoxy Mortars.
  271. 503.5R – 92 Guide for the Seletion of Polymer Adhesieve with Concrete.
  272. 503.6R – 97 Guide for the Application of Epoxy and Latex Adhesives for Bonding Freshly Mixed and Hardened Concrete.
  273. 506.1R – 98 Committee Report on Fiber Reinforced Shotcrete.
  274. 506.2 – 95 Specification for Shotcrete,506.3R – 91 Guide to Certification of Shotcrete Nozzlemen.
  275. 506.3R – 91 Guide to Certification of Shotcrete Nozzlemen,506.4R – 94 Guide for the Evaluation of Shotcrete.
  276. 515.1R – 79 A Guide to the Use of Waterproofing , Dampproofing, Protective, and Decorative Barrier Systems for Concrete.
  277. 523.1R – 92 Guide for Cast – in – Place Low – Density Concrete.
  278. 523.2R – 96 Guide for Precast Cellular Concrete Floor, Roof and Wall Units.
  279. 523.3R – 93 Guide for Cellular Concretes Above 50 pcf , and for Aggregate Concretes Above 50 pcf with compressive strength less than 2500 psi.
  280. 530.1 – 95 Specification for Masonary Structures ( ASCE 6 – 95 / TMS 602 – 95 ).
  281. 530.1R – 95 Commentary on Specification for Masonary Structures ( ASCE 6 – 95 / TMS 602 – 95 ).
  282. 544.1R – 96 State of the Art Report on Fiber Reinforced Concrete.
  283. 544.2R – 89 Measurments of Properties of Fiber Reinforced Concrete.
  284. 544. 3R – 93 Guide for Specifying , Proportioning, Mixing, Placing and Finishing Fiber Reinfoced Concrete.
  285. 544 . 4R – 88 Design Considerations for Steel Fiber Reinforced Concrete.
  286. 546.1R – 80 Guide for Repair of Concrete Bridge Superstructures.
  287. 546.2R – 98 Guide to Underwear Repair of Concrete.
  288. 547.1R – 89 State of the Art Report Refractory Plastics and Ramming Mixes.
  289. 548.1R – 97 Guide for the Use of Polymers in Concrete.
  290. 548.2R – 93 Guide for Mixing and Placing Sulfur Concrete in Construction.
  291. 548.3R – 95 State of the Art Report on Polymer – Modified Concrete.
  292. 548.4 – 93 Standard Specification for Latex – Modified Concrete ( LMC ) overlays.
  293. 548.5R – 94 Guide for Polymer Concrete Overlays.
  294. 548.6R – 96 Polymer Concrete – Structural Applications Stat of the Art Report.
  295. 325.10R – 95 State of the Art Report on Roller Compacted Concrete Pavments.
  296. SP4 – 95 Formwork for Concrete.
  297. SP15 – 95 Standard Specifications for structural Concrete.
  298. SP17 – 97 ACI Design Handbook.
  299. SP71 – 95 ACI Detailling Manual.
  300. SP71 – 95 ASTM Standards in ACI 301 and 318

Keyword for this article is ”ACI Standards List for Civil Engineering International Standards”.

 

Leave a Comment

error: Content is Protected.