What are Handover Failure Counters in LTE? Possible Solutions
This article is about Counter Measurements Related to Handover (LTE), Intra, Inter RAT handover measurement for both incoming and outgoing and we collected list…
Read articleTELECOM RF
Browse 207 free articles, standards and practical guides about TELECOM RF.
207 articles in this topic
eRAB Drop Counters and Solution (RF LTE Optimization)
This article is about Measurements Related to E-RAB (LTE), E-RAB Setup Drop Measurement and we collected list of counters which shows eRAB drops. After,…
Read articleeRAB Failure Counters and Solution (RF LTE Optimization)
This article is about Measurements Related to E-RAB (LTE), E-RAB Setup Failure Measurement and we collected list of counters which shows eRAB fails. After…
Read articleAdvertisement
LTE Throughput Performance Optimization Parameter
We have following Downlink parameters and features optimization for LTE and LTE Advance. 1. Initial DL MCS Selecting Optimization. MML Object Parameter ID Recommendation…
Read articleLTE FDD Throughput Calculations
To calculate LTE FDD (Frequency Division Duplex) throughput, several technical parameters are taken into account: How to calculate LTE Throughput Calculation (FDD)? System BW…
Read articleSystem Information Blocks (SIBs) in LTE
In this article, i am going to explain each parameter meaning used in System Information Blocks (SIBs) in LTE layer 3 messages and events…
Read articleWhat is RTWP? RTWP Troubleshooting Guide
RTWP (Received Total Wideband Power) measures the total power received in a cell. Its normal range is around -106 dBm (±4 dBm). If RTWP…
Read article5G NR Accessibility KPIs
RRC Setup Success Rate (CU) The RRC connection setup process in 5G networks, as described in 3GPP TS 38.331, starts when the UE (User…
Read articleWhat is NETMAX and ZXPOX CNP?
ZXPOS NETMAX: Tool for Network Fault Analysis and Optimization ZXPOS NETMAX is an advanced tool specifically designed for the analysis and optimization of wireless…
Read articleZXPOS CNA: An Intelligent System for RF Network Optimization
ZXPOS CNA is a sophisticated wireless network optimization analysis system that is designed to support a wide range of network technologies, including 2G, 3G,…
Read articleZXPOS CNT: An Advanced Tool for Wireless Network Testing and Optimization
ZXPOS CNT is a state-of-the-art wireless network air interface test tool, specifically designed for troubleshooting, evaluation, optimization, RF drive testing and maintenance of mobile…
Read articleLTE SINR Optimization.
SINR Definition. The SINR (Signal to Interference plus Noise Ratio) measures the quality of the signal relative to the interference and noise it experiences.…
Read article