Massive MIMO Understanding with RF Optimization Scenarios.
While 5G networks are still in the early stages of deployment, and most commercial mobile devices don’t yet support them, Massive MIMO (MM) offers…
Read articleTELECOM RF
Browse 207 free articles, standards and practical guides about TELECOM RF.
207 articles in this topic
What is LTE PRACH? PRACH Parameter Optimization
The Random Access Procedure in LTE is an important process handled by the MAC (Medium Access Control) layer and the physical layer, enabling UEs…
Read articleRRC Connection Establishment Failures in LTE: Causes and Troubleshooting
RRC (Radio Resource Control) connection establishment is a signaling process in LTE networks, enabling UEs (User Equipment) to communicate with the network. Failures in…
Read articleAdvertisement
LTE Call Drop Analysis
In LTE networks, the call drop rate is a critical performance indicator that directly impacts user experience. It reflects the system’s ability to sustain…
Read articleLTE Handover Delay Optimization
There are three categories of handover in the LTE system: Process and Categories of LTE Handover. LTE Handover Flow Chart. The handover process is…
Read articleWhat is LTE Handover Latency? How to Optimize?
Handover latency in LTE refers to the time delay on the control plane during the handover process. Specifically, it is the period starting from…
Read articleWhat is TA in LTE? Timing Advance Procedure
The timing advance is sent by the eNodeB to the UEs so that each UE advances/delays its UL transmission(s) in order to compensate for…
Read articleRandom Access Procedure in LTE with Parameter Optimization
The random access procedure is performed for the following five events: Note that for the last 3 events the UE already has a Cell-Radio…
Read articleWhat is LTE MAC Scheduler?
The MAC Scheduler is a key component of the LTE network’s eNodeB, responsible for managing how radio resources are used within a cell. This…
Read articleLTE Availability KPIs.
This LTE availability KPI indicates the percentage of time when cells in a radio network are available to provide EPS bearer services. It is…
Read articleService Integrity KPIs in LTE Networks
Service integrity KPIs (Key Performance Indicators) are crucial for assessing the quality of service provided to UEs (User Equipment) in an E-UTRAN (Evolved Universal…
Read articleLatency in LTE Networks and Latency KPIs.
Latency in telecommunications and networking refers to the time delay between the transmission of a signal and its receipt. It is a critical performance…
Read article