Earthing Connection to Steelwork – Earthing Installation Methods

This article is about Earthing Connection to Steelwork – Earthing Installation Methods

1. M 10 X 35 Mm Brass Hex Head Bolts.
2. 10 mm Brass Plain Washers.

    

3. Earthing Boss- 25 Mm Diameter Mild Steel Rod.

    

4. Straight Crimp Type Cable Lug. (Size to Suit)
5. 50 Mm Diameter. p.v.c. Pipe/duct.
6. P.V.C. Pipe Clips – 50 mm Diameter
7. 40 * 10 Mild Steel Flat Bar

    

8. 10 Mm Brass Hex Nuts.

Notes.

1. Support Steel Items Shall Be Fabricated by the Electrical Contractor.
2. Where Cable Extends Across Skid, Suitable Protection Shall Be Applied in the Form of Plastic Pipe or Equiv.
3. Earth Cables to Be Connected to Local Earthing Link-Up Plates or Earthing Rails, See Layout for Details.
4. for Earth Cable Conductor Size Refer to Layout Drawing.