SAUDI ARAMCO ENGINEERING STANDARD FOR ELECTRICAL SYSTEM
1. SAES-P-100 – Basic Power System Design Criteria
2. SAES-P-101- Regulated Vendors List for Electrical Equipment
3. SAES-P-103 – UPS and DC Systems
4. SAES-P-104 – Wiring Methods and Materials NEC Equivalent = Chapter 3, Article 300
5. SAES-P-107 – Overhead Distribution Systems
6. SAES-P-111 – Grounding NEC Equivalent = Chapter 2, Article 250
7. SAES-P-113 – Motors and Generators
8. SAES-P-114 – Power System and Equipment Protection
9. SAES-P-116 – Switchgear and Control Equipment NEC Equivalent = Chapter 4
10. SAES-P-119 – Onshore Substations
11. SAES-P-121 – Transformers and Reactors NEC Equivalent = Chapter 4
12. SAES-P-123 – Lightings
SAUDI ARAMCO ENGINEERING STANDARD FOR INSTRUMENTATION SYSTEM
1. SAES-J-001 – Instrumentation Index
2. SAES-J-002 – Technically Acceptable Instrument Manufacturers
3. SAES-J-003 – Instrumentation Basic Design Criteria
4. SAES-J-004 – Instrumentation Symbols and Identification
5. SAES-J-005 – Instrumentation Drawings and Forms
6. SAES-J-100 – Process Flow Metering
7. SAES-J-200 – Pressure
8. SAES-J-300 – Level
9. SAES-J-400 – Temperature
10. SAES-J-502 – Analyzer Shelters
11. SAES-J-505 – Combustible Gas and Hydrogen Sulfide in Air Detection Systems
12. SAES-J-600 – Pressure Relief Devices
13. SAES-J-601 – Emergency Shutdown and Isolation Systems
14. SAES-J-602 – Burner Management, Combustion and Waterside Control Systems for Watertube Boilers
15. SAES-J-603 – Process Heaters Safety Systems
16. SAES-J-604 – Protective and Condition Monitoring Equipment for Rotating Machinery
17. SAES-J-605 – Surge Relief Protection Systems
18. SAES-J-607 – Burner Management Systems for SRU Trains
19. SAES-J-700 – Control Valves
20. SAES-J-801 – Control Buildings
21. SAES-J-901 – Instrument Air Supply Systems
22. SAES-J-902 – Electrical Systems for Instrumentation
23. SAES-J-903 – Intrinsically Safe Systems
24. SAES-J-904 – FOUNDATION Fieldbus (FF) Systems
SAUDI ARAMCO ENGINEERING STANDARD FOR CATHODIC PROTECTION
1. SAES-X-300 – Cathodic Protection of Marine Structures
2. SAES-X-400 – Cathodic Protection of Buried Pipelines
3. SAES-X-500 – Cathodic Protection of Vessel and Tank Internals
4. SAES-X-600 – Cathodic Protection of Plant Facilities
5. SAES-X-700 – Cathodic Protection of Onshore Well Casings
6. SAES-X-800 – Cathodic Protection for Existing Reinforced Concrete Structures
SAUDI ARAMCO ENGINEERING STANDARD FOR SAFETY REQUIREMENTS:
1. SAES-B-008 – Restrictions to Use of Cellars, Pits, and Trenches
2. SAES-B-063 – Aviation Obstruction Marking and Lighting
3. SAES-B-064 – Onshore and Nearshore Pipeline Safety
4. SAES-B-068 – Electrical Area Classification