DISTRIBUTION BOARD OR JUNCTION BOX SUPPORT FRAME INSTALLATION

This article is about Distribution Board or Junction Box Support Frame Installation in Petrochemical Plants.

Distribution Board or Junction Box Support Frame Installation in Petrochemical Plants

1. 75 x 50 x 6 MILD STEEL ANGLE
2. 50 x 50 x 6 MILD STEEL ANGLE
3. 12mm RAWLBOLT OR SIMILAR
4. 6mm THICK MILD STEEL PLATE

NOTES.

1. DIMENSIONS TO SUIT APPLICATION.
2. WHERE A CONCRETE SLAB IS NOT AVAILABLE, A SUITABLE PLINTH SHALL BE CAST.
3. STAND SHALL BE OF WELDED CONSTRUCTION AND PAINTED OR HOT DIPPED GALVANISED AS PER THE PROJECT SPECIFICATION.
4. A/R DENOTES AS REQUIRED.