Electrical Standard Installation Details
Here are few electrical installation details for construction and during maintenance phase.
- Above Ground and Below Ground Motor Installation Details
- Lighting Installation Details
- Grounding Installation Details
- Receptacles Installation Details
- Panel Board Installation Details
- Cable Tray Installation Details
- Underground Installation Details
- Cathodic Protection Details
- Electrical Heat Tracing Details
- Lightning Protection Installation Details
- Support Installation Details
Electrical Standard Installation Details
Above Ground and Below Ground Motor Installation Details.
• Low Voltage Separate Power and Control-Steel wire Armor cable.
• Medium Voltage Separate Power and Control – Steel wire Armor cable.
• Low Voltage Motor Accessory Box Connection Combined With Control wires -Steel Conduit.
• Low Voltage Power Only -Steel Wire Armor Cable.
• MV Power Only – Steel Wire Armor Cable.
• Motor Termination Assembly 480V Motors and Below.
• Motor Termination Assembly 5KV Motors and Above.
• Control Station Support Location Plan – Above Ground Feed.
• RTD and Accessory Terminal Box Connections – For 5KV Motors-Steel Wire Armor Cable.
• Combined Power And Control-Steel Conduit.
Click here to check all details drawings.
BELOWGROUND MOTOR INSTALLATION DETAILS
• Low Voltage Separate Power and Control-Steel wire Armor cable
• Medium Voltage Separate Power and Control -Steel wire Armor cable
• Motor Accessory Box Connection – Combined with Control Wires -Steel Wire Armor Cable
• Power Only-Steel Wire Armor Cable
• Control Station Support Location Plan – Belowground Feed
• RTD and Accessory Terminal Box Connections – For 5KV Motors-Steel with Armor Cable
• Separate Power & Control-Steel Wire Armor Cable -5KV Motors
• Separate Power and Control-Steel Conduit
•Motor Accessory Box Connection- Combined with Control Wires -Steel Conduit
• Power Only-Steel Conduit
• RTD and Accessory Terminal Box Connections – For 5KV Motors-Steel Conduit
• Separate Power and Control-Steel Conduit – 5KV Motors
Click here to check all details drawings.
LIGHTING INSTALLATION DETAILS
• Pendant Mount
• Pendant Mount With Support
•Pendant Mount With Brace
• Pendant Mount -Indoor
• Bracket OR Ceiling Mount On Concrete
• Bracket OR Ceiling Mount On Steel
• Bracket OR Ceiling Mount On Fireproofed Column
• Yard Mast
• Handrail Stantion Mount ,Steel Platform
• Hand Rail Stantion Mount ,Wood Platform
• Handrail Floodlight Mount -Steel Platform
• Bracket Mounted FloodLight, Steel OR Concrete
•Bracket Mounted FloodLight, FireProofed Column
• FloodLight Mast
• StreetLight Mount
• Illuminated Gage Glass
• Illuminated Gage Glass
• Fluorescent Fixture Mounting
• Fluorescent Fixture Mounting
• AirCraft Obstruction Flashing Red Beacon – Handrail Mount-Steel Platform
• AirCraft Obstruction Light -Red, Handrail Mount-Steel Platform
• Street Light Termination Assembly
• Bracket/Wall Mounted Fixture • Exit Light Mounting Assembly
• Emergency Lighting Mounting Assembly, Indoor.
Click here to check all details drawings.
GROUNDING INSTALLATION DETAILS
- Ground Well Concrete Box
- Ground Rod Assembly Mechanical Connection
- Steel Column OR Equipment Ground Assembly
- Steel Column OR Equipment Ground Assembly
- Concrete -Riser Ground Assembly
- Ground Conductor Riser Assembly
- Ground Bus -Concrete Mount Assembly
- Ground Bus -Steel Column Mount Assembly
- Supplemental Motor Ground Assembly
- Control Station Support Ground Assembly
- Supplemental Grounding of Motor With
- Control Station Support
- Vertical Vessel Grounding
- Elevated Horizontal Vessel OR Exchanger Grounding
- Fence Post Ground assembly
- Fence Gate Ground Assembly
- Security Fence Post Ground Assembly.
- Equipment Ground Assembly
- Pad Mounted Power Transformer Grounding
- Equipment ground Bus Assembly(Cable Lugs)
- Equipment Ground Bus Assembly(Servit Posts)
- Transformer/PanelBoard Grounding Schematic
- Compression Ground Plate Installation
- Isolated Ground Bus Floor OR Wall Mounted Assembly
- Conduit Stub -Up Bonding Jumper
- Truck Grounding Station
- Ground Compression System
- Ground Rod Assembly For Cathodic Protection Areas
- Ground Well Concrete Box For Cathodic
- Protection Areas
Click here to check all details drawings.
RECEPTACLES INSTALLATION DETAILS
- Receptacle/Switch Indoor-Flush & Surface Mounted
- Concrete OR FireProofed Column Mounted AboveGround Feed Switch OR Receptacle in Conduit
- Concrete OR Fire Proofed Column Mounted Switch OR Receptacle
- UnderGround Feed in Conduit
- Steel Column Mounted Receptacle OR Switch AboveGround Feed in Conduit
- Steel Column Mounted Receptacle OR Switch UnderGround Feed in Conduit
- Free Standing Pedestal Mounted Receptacle OR Switch AboveGround Feed
- Free Standing Pedestal Mounted Receptacle OR Switch – UnderGround Feed in Conduit
- HandRail Mounted Receptacle OR Switch
- Concrete OR FireProofed Column Mounted Power Receptacle, With Junction Box -AboveGround Feed
- Steel Column Mounted Power Receptacle,With Junction Box -AboveGround Feed Class 1,Division 1 OR 2 & Unclassified
- Concrete OR Fireproofed Column Mounted W/Cable Channel,,AboveGround Feed Switch OR Receptacle.
- Concrete OR FireProofed Column Mounted Switch OR Receptacle,UnderGround SWA Cable Feed
- Steel Column Mounted Receptacle OR Switch W/Cable Channel, AboveGround Feed
- Steel Column Mounted Receptacle OR Switch,UnderGround SWA Cable Feed
- Handrail Mounted Receptacle OR Switch
- FiberGlass Handrail
Click here to check all details drawings.
PANELBOARD INSTALLATION DETAILS
- Column Mounted PanelBoard And Transformers AboveGround Feed -Steel Wire Armor Cable
- Column Mounted PanelBoard And Transformers BelowGround Feed -Steel Wire Armor Cable
- PanalBoard Installation -Wall Mounted (Indoor)
- PanelBoard Installation – Wall Mounted (Indoor)
- Unitized Distribution Substation-AboveGround Feed, OutDoor -Steel Wire Armor Cable
- Utilized Distribution Substation -AboveGround Feed -Indoor
- Column OR Wall Mounted PanelBoard – AboveGround Feed
- Column Mounted PanelBoard -UnderGround Feed
- Column OR Wall Mounted Fused Terminal Cabinet, AboveGround Feed -Rigid Steel Conduit
- Column Mounted Fused Terminal Cabinet-UnderGround Feed
- Column Mounted Fused Terminal Cabinet,AboveGround Feed -Steel Wire Armor Cable
- 126 Terminal(40 Fused )Dual Strip Junction Box
- 126 Terminal Junction Box (40 Fused )Dual Strip- Explosion Proof
- Unitized Distribution Substation -UnderGround Feed,Outdoor -Steel Wire Armor Cable
- Unitized Distribution Substation -UnderGround Feed,Outdoor -Steel Conduit
Click here to check all details drawings.
CABLE TRAY INSTALLATION DETAILS
- Cable Tray Trapeze Support Assembly – Strut
- Cable Tray Clamp Assembly
- Cable Tray Grounding Assembly
- Wire OR Cable IN Tray
- To Conduit Assembly
- Cable Tray Clamp Assembly
- Assembly -Concrete Beam
- Cable Tray Support From Vertical
- Structural Steel Assembly
- Tray Drop Assembly Span Drop Top OR Front Only
- Aluminium Offset Splice Plate Assembly
- Aluminium Expansion Splice Plate Assembly
- Aluminium Cable Tray Hinged – Splice Plate Assembly
- Aluminium Cabel Trayh 90 degree – Splice Plate Assembly
- Cable Tray Fire Shield Assembly
- Aluminium Cable Tray Cover Assembly
- Aluminium Cable Tray Cover Assembly – Both Sides
- Aluminium Box Connector Assembly
- Cable Channel Trapeze Support,Assembly – Strut
- Cable Channel Clamp Assembly
- Cable Channel Clamp Assembly,(concrete beam )
- Cable Channel Support From Verticle
- Aluminium Cable Channel Hinged,Splice Plate Assembly
- Aluminium Cable Channel Cover Assmbly
- FiberGlass Cable Tray Trapeze Support, Assembly Strut
- FiberGlass Cable Tray Clamp Assembly
- Wire OR Cable FiberGlass Tray, To Conduit Assembly
- FiberGlass Expansion Splice Plate ON Channel Assembly
- FiberGlass Cable Tray Cover Assembly
Click here to check all details drawings.
UNDERGROUND INSTALLATION DETAILS
- Conduit Stub-Up
- Conduit Duct Bank
- 600V OR Less (UnPaved Areas Only)
- 35KV Trench (UnPaved Areas Only)
- 5 KV OR 15 KV Trench ,(Unpaved Areas Only)
- Typical Load Bearing 35KV Cable Trench , At Road Crossing
- Typical Routing Marker
- Typical load Bearing Cable Trench at Road Crossing and in Concrete Paved/Graded Areas.
- Typical Instrument Cable Trench,(Paved OR UnPaved Areas)
- Typical Instrument Cable Concrete Trench,(Paved Areas)
Click here to check all details drawings.
CATHODIC PROTECTION INSTALLATION DEATILS
- Cathodic Protection Junction Box at Above Ground Tank
- Piping Galvanic Cathodic Protection System
- Direct Burail Splice
- Header Cable to C.P Anode Lead
- Exothermic Weld to Pipe Process
- Cathodic Protection Test Station and Jumper, Impressed Curent C.P System.
- Cathodic Protection, AboveGround Tank Bottom,Impressed Curent System,Using Mixed Metal Oxide (MMO) Anodes.
- Cathodic Protection Junction Box,,For U/G Process Piping.
- Cathodic Protection 30 Amp Groundbed.
- CP Coupon Monitoring Station.
Click here to check all details drawings.
ELECTRICAL HEAT TRACING INSTALLATION DETAILS
- Typical arrangement 2 Cables
- Valve Body
- Flange Connection
- Welded Support Column
- “DEAD MAN “Support
- Heater Position
- Typical Arrangement 3 Cables
- Pipe Support , Shoe
- Contactor Fed From Local Power Panel And Controlled,By an Ambient Thermostat
- InterModule Connection Details
- Heat Tracing Circuits Controlled by Ambient Thermostat
- RTD Installation
Click here to check all details drawings.
LIGHTNING PROTECTION INSTALLATION DETAILS
- Air Terminal -Parapet Mounting Top Mount
- Air Terminal -Roof Mounting, Concrete surface
- Air Terminal – Roof Mounting
- Built up Surface,Air Terminal-Wall OR Parapet Mounting,Concrete Surface with Coping Overhead
- Air Terminal-Wall OR Parapet Mounting,Concrete Surface
- Air Terminal -Ridge OR Cable Mounted
- DownLead Conductor – Concealed,OR Embedded In Wall.
- DownLead Conductor, Surface OR Wall Mounted
- Air Terminal, Metal Frame Equipment – Top Mount
- Air Terminal, HandRail Mount
- DownLead Conductor -Surface,OR Wall Mounted AT Grade
- Metal Frame Bond
Click here to check all details drawings.
SUPPORT INSTALLATION DETAILS
- Control Station Support Aboveground Cable Feed
- Control Station Support Underground Feed
- Junction Box Support Rack Front Mount
- Junction Box Support Rack Front and Rear Mount
- Junction Box Support to Column
- Equipment Support to Column
- Miscellaneous Electrical Support