Fabrication of Structural, Miscellaneous Steel | 12-SAMSS-007 Download

Following Topics to be discussed in this article are 

  1. Scope of Structural Fabrication Work.
  2. Conflicts and Deviations
  3. International Standards and Codes References for Fabrication of structural and steel works.
  4. What are Products and Materials to be used.
  5. Galvanizing, Painting and Coating for steel and structural works.
  6. Fabrication Methods for Steel and structural works.
  7. Inspection and Testing Application.
  8. Appendix 1 – ASTM Material Equivalency if possible and permission by client.

Fabrication of Structural, Miscellaneous Steel | 12-SAMSS-007 Download

Fabrication of Structural, Miscellaneous Steel | 12-SAMSS-007 Download

This Specification characterizes the necessities for material choice, associations, enumerating, manufacture, exciting, painting and coatings, stamping for erection and conveyance of basic and random steel. Erection of auxiliary steel will be per 12-SAMSS-008. Seaward structures and pre-built metal structures are prohibited from this detail.

Material Requirements

All material will be of new stock. The base thickness of any piece of a basic shape will be 5 mm.  Where contact of divergent metals will cause galvanic consumption, a reasonable protecting material will be given between the metals.

Auxiliary Shapes, Plates and Bars

ASTM A36/ASTM A36M (for plates, bars, M, S, HP, C, MC and L-shapes); ASTM A572/ASTM A572M, or ASTM A992/ASTM A992M (for WT and W-shapes). Generally acknowledged basic steel materials and shapes other than ASTM might be utilized as per Appendix 1 of this determination. Any difference(s) in the material measurements, segment properties, yield quality or elasticity will be represented in the structure computations.

Metal Decking

Floor and rooftop metal deck will be cold-framed steel sheets adjusting to ASTM A653/A653M or ASTM A1008/A1008M or equivalent having a base yield quality of 228 N/mm² (33,000 psi). The metal deck will be electrifies and get a defensive covering of zinc complying with ASTM A653/A653M, G90 Coating Designation. Configuration will be as per SDI Design Manual for Composite Decks, Form Decks and Roof Decks, No. 31.

You can can ASTM standards with official website of ASTM.

Leave a Comment

error: Content is Protected.