LOW POINT DRAIN INSTALLATION DETAILS – ELECTRICAL ENGG.

This article is about low point drain installation and details of all material required for drain point installation for electrical work installation. Keywords for this topics are low point drain in piping, vent and drain in piping, low point drain valve replacement, how to close low point drain, low point drain plug, rv low point drain valves, t handle low point drain valve, process piping vents and drains.

LOW POINT DRAIN INSTALLATION DETAILS – ELECTRICAL ENGINEERING

DRAIN DETAIL SINGLE INSTRUMENT

DRAIN DETAIL SINGLE INSTRUMENT - LOW POINT DRAIN INSTALLATION

DRAIN DETAIL MULTIPLE INSTRUMENTS

DRAIN DETAIL MULTIPLE INSTRUMENTS - LOW POINT DRAIN INSTALLATION

BILL OF MATERIALS

  1. ( CONNECTOR, LIQUID TIGHT, 1/2” (12 mm).
  2. CONDUIT, LIQUID-TIGHT, FLEXIBLE, 1/2” (12 mm) 24” (600 mm) LONG MAXIMUM.
  3. REDUCER, AS REQUIRED 1/2” (12 mm)
  4. DRAIN/VENT,
    GENERAL PURPOSE AREAS
    CROUSE-HINDS CD1 1/2” (12 mm) OR CD2 3/4″ (20 mm)
    FOR HAZARDOUS AREAS WHERE REQUIRED BY N.E.C. CROUSE-HINDS ECD 15 1/2” (12 mm).
  5. FORM 8 CONDUIT FITTING, SEE CONTRACT DRAWINGS OR SIZE AS REQUIRED
  6. CONDUIT, SEE CONTRACT DRAWINGS OR SIZE AS REQUIRED.
  7. MYERS SCRU-TITE HUB SIZE AS REQUIRED.

LOW POINT DRAIN INSTALLATION DETAILS FOR TERMINAL BOX OR CONTROL PANEL

LOW POINT DRAIN INSTALLATION DETAILS - TERMINAL BOX OR CONTROL PANEL

GENERAL NOTES AND POINTS FOR LOW POINT DRAIN INSTALLATION

I. THIS DETAIL SHOWS VARIOUS METHODS FDR CONDUIT AND DRAIN INSTALLATION. ALL VARIATIONS MAY NOT BE REQUIRED FOR A SPECIFIC INSTALLATION.
2. USE BOTTOM ENTRY UNTIL ALL AVAILABLE ARE IS EXHAUSTED BEFORE ENTERING SIDES OF BOX. SIDE ENTRIES SHALL BE MADE IN LOWER PORTION OF ENCLOSURE.

3. SEE ABOVE BILL OF MATERIALS IN THIS ARTICLE.

4. CONDUIT ENTRY MAY REQUIRE SEAL FITTINGS, NOT SHOWN. SEE CONTRACT DRAWINGS FOR REQUIREMENTS.

Other keywords you need to check for this article and we will make our article more up to date as technology advances.

  • vent and drain philosophy.
  • hydrotest vent and drain.
  • vent and drain in piping.
  • process piping vents and drains.
  • vents and drains piping.
  • high point vent and low point drain.
  • vent and drain valve.
  • what are high point vents.
  • low point drain in piping.
  • vent and drain in piping.
  • low point drain valve replacement.
  • how to close low point drain.
  • low point drain plug.
  • rv low point drain valves.
  • process piping vents and drains.
  • t handle low point drain valve.
  • vent and drain valve.
  • hydrotest vent and drain.
  • what are high point vents.
  • high point air vent.
  • high point vent pit.

Electrical Work Technical Specification Petrochemical Plants

 

Leave a Comment

error: Content is Protected.