This article is about Quality System Definitions for QC Engineer / Inspector related to topic of Quality System Inspection as per Saudi Aramco or International Standards.
Quality System Definitions for QC Engineer / Inspector
DEFINITION OF TERMS
- RFI Stands for Request for Inspection.
- SAER Stands for Saudi Aramco Engineering Requirements.
- SAES Stands for Saudi Aramco Engineering Standards.
- SAMSS Stands for Saudi Aramco Material System Specifications.
- ASTM Stands for American Society for Testing & Materials.
- MEEDCO Stands for Middle East Eng’g and Dev’t Company Ltd.
- HDEC Stands for Hyundai Engineering & Construction Company Ltd.
- ITP Stands for Inspection & Test Plan.
- ITR Stands for Inspection & Test Report.
- IRC Stands for Inspection Release Certificate.
- TPI Stands for Third Party Inspector.
- TPIR Stands for Third Party Inspection Report.
- PRB Stands for Project Record Book.
- P & ID Stands for Piping & Instrument Diagram.
- ASME Stands for American Society of Mechanical Engineer.
- ASCE Stands for American Society of Civil Engineer.
- SAEP Stands for Saudi Aramco Engineering Procedure.
- SAIC Stands for Saudi Aramco Inspection Checklist.
- SATIP Stands for Saudi Aramco Typical Inspection Plan.
- SATR Stands for Saudi Aramco Test Report.
- SASD Stands for Saudi Aramco Standard Drawing.
- PIP Stands for Process Industry Practices.
- APIStands for Stands for American Petroleum Institute.
- AARH Stands for Average Arithmetic Roughness Height.
- MDMT Stands for Minimum Design Metal Temperature.
- DFT Stands for Dry Film Thickness.
- APCS Stands for Approved Protective Coating Systems.
- ANSI Stands for American National Standard Institute.
- AWS Stands for American Welding Society.
- ASD Stands for Allowable Stress Design.
- LRFD Stands for Load & Resistance Factor Design.
- OID Stands for Operation Inspection Design.
- NFPA Stands for National Fire Protection Association.
- NPS Stands for Nominal Pipe Size.
- NPT Stands for Nominal Pipe Thread.
- ERW Stands for Electric Resistance Welded.
- MEU Stands for Stands for Material Engineering Unit.
- SALD Stands for Saudi Aramco Library Drawing.
- CDMS Stands for Corporate Drawing Management System.
- HIC Stands for Hydrogen Induced Cracking.
- NACE Stands for National Association of Corrosion Engineer.
- FRPT Stands for Fiberglass Reinforced Plastic Tank.
- PMI Stands for Positive Material Identification.
- PWHT Stands for Post Weld Heat Treatment.
- SAEF Stands for Saudi Aramco Engineering Form.
- EDSD Stands for Engineering Drawing Services Division.
- NMR Stands for Non Material Requirements (Certified Drawings, Literature, Photographs, Maintenance Manual, Installation Instruction, Shop Detailed Drawings).
- IAP Stands for Inspection Assignment Package.
- NCR Stands for Non Conformance Report.
- IRC Stands for Inspection Release Certificate.
- IDR Stands for Inspection Disposition Certificate.
- WIN Stands for Witness Inspection Notice.
- VIRB Stands for Vendors Inspection Record Book.
- BLP Stands for Break Loose Pressure.
- CSD Stands for Consulting Services Department.
- PFI Stands for Pipe Fabrication Institute.
- AISC Stands for American Institute of Steel Construction.
- ASNT Stands for American Society of Nondestructive Testing.
- WRC Stands for Welding Research Council.
- MAWP Stands for Maximum Allowable Working Pressure.
- NDE Stands for Non Destructive Examination.
- SAID Stands for Saudi Aramco Inspection Department.
- WPS Stands for Welding Procedure Specification.
- PQR Stands for Procedure Quality Record.
- EIS Stands for Equipment Inspection Schedule.
- IRB Stands for Inspection Record Book.
- NAAMM Stands for National Association of Architectural Metal Manufacturer.
- MSS Stands for Manufacturers Standardization Society.
- PQP Stands for Project Quality Plan.
- QMIS Stands for Quality Management Information Systems.
- EDMS Stands for Electronic Document Management System.
- PQL Stands for Project Quality Plan.
- HSE Stands for Health and Safety Environment.
- GTAW Stands for Gas Tungsten Arc Welding.
- GMAW Stands for Gas Metal Arc Welding.
- FCAW Stands for Flux Cored Arc Welding.
- SMAW Stands for Shielded Metal Arc Welding.
- SAW Stands for Submerged Arc Welding.
- UT Stands for Ultrasonic Examination.
- RT Stands for Radiographic Examination.
- MT Stands for Magnetic Particle Examination.
- PT Stands for Liquid Penetrant Examination.
- RTRP Stands for Reinforced Thermosetting Resin Pipe.
- BMG Stands for Bottled Gas Manual.
- DMW Stands for Dissimilar Metal Weld.
- BI Stands for Number Bubget Item Number.
- TOFD Stands for Time of Flight Diffraction (detection of flaws).
Quality Control Mechanical Interview Questions | CBT Aramco
PIPING QC CBT QUESTIONS | FLANGE JOINT TIGHTENING METHODS
Piping QC Notes CBT Aramco | PIPE FIT-UP AND TOLERANCES
Piping QC Notes & CBT Aramco | Piping Erection & Installation
For more knowledge please check pdfyar.com.