Automatic Transfer Switch (ATS) | Working Principle | Types | Switching Mechanism [PDF]

What is Automatic Transfer Switch?

An Automatic Transfer Switch (ATS) is a critical component of an electrical power system that is designed to automatically and seamlessly transfer the electrical load from one power source to another in the event of a power outage or when there is a change in the primary power source’s availability or quality. ATSs are commonly used in backup power systems, such as standby generators or uninterruptible power supplies (UPS), to ensure uninterrupted electrical power to essential equipment or circuits.

Automatic Transfer Switch Basics:

Transfer switches are fundamental components in critical power systems, ensuring that electrical loads can seamlessly transition between normal and emergency power sources. Here’s a breakdown of some key concepts related to transfer switches:

1. Normal and Emergency Power Sources: Facilities like data centers, hospitals, and factories rely on a continuous power supply. The normal power source is the primary electrical supply, typically provided by the utility grid. The emergency power source, often a backup generator or a secondary utility feed, comes into play when the normal power source fails.
2. Transfer Switch Function: Automatic Automatic Transfer switches are responsible for managing the transition of electrical loads between these power sources. They ensure that power is efficiently and safely rerouted to maintain uninterrupted operation.
3. Load: The load refers to all electrical devices, circuits, equipment, or systems connected to the output of the transfer switch. This can include critical equipment, lighting, HVAC systems, and more.

4. Transfer Sequence: The typical transfer sequence involves the following steps:
5. Automatic and Manual Operation: Transfer switches can operate in automatic mode, where they detect power source changes and execute transfers without human intervention. In manual mode, an operator initiates the transfer based on their judgment or specific procedures.
6. Importance of Voltage and Frequency Tolerances: Transfer switches rely on prescribed voltage and frequency tolerances to ensure the quality and compatibility of the power source. Deviations outside these tolerances may trigger or prevent transfers.
7. Facility-Specific Configuration: The type of transfer switch and its operation mode (automatic or manual) can vary based on the specific needs and preferences of a facility. Some applications require immediate, automatic transfers to maintain uninterrupted operation, while others may allow for manual intervention.

Automatic Transfer switches play a crucial role in maintaining uptime and ensuring that critical systems continue to receive power during unexpected outages or emergencies. They are a critical component of overall electrical infrastructure in facilities where uninterrupted power is essential.

Components of Automatic Transfer Switch (ATS):

Following are the list of ATS components

1. Controller.
2. ATC-100 or 300 Controller.
3. Source 1 Normal Connections.
4. Load Connections.
5. Multi-Tap Transfer.
6. Source 2 Connections (For Emergency)
7. Transfer Mechanism.
8. Neutral Connection.

Common System Installation Types of ATS:

Transfer switches are used in various applications classified into four categories as defined by the National Electrical Code® (NFPA 70). These categories help determine the type of automatic transfer switch required for a specific application:

1. Emergency Systems:
2. Legally Required Systems:
3. Critical Operations Power Systems (COPS):
4. Optional Standby Systems:
5. Understanding these categories is essential in determining the specific regulatory requirements and the type of automatic transfer switch needed for each application. It ensures that the proper equipment is in place to maintain power continuity for critical systems and functions during normal and emergency situations.
6. Transfer switches facilitate the transition of electrical loads between normal and emergency power sources, and this transition can occur in two basic ways: open transition and closed transition. The choice of transition type depends on the specific functions of the loads and their importance to safety and security.
7. In an open transition, also known as a “break before make” transfer, the automatic transfer switch disconnects from one power source before connecting to the other. During a brief period between disconnection and connection, neither the normal power source nor the emergency source supplies electricity to the downstream loads. There are two subtypes of open transition: open delayed and open in-phase.
8. Open Delayed Transition:
9. Disadvantages:
10. Open In-Phase Transition:
11. Disadvantages:
12. The choice between open and closed transition depends on factors like the load’s sensitivity to power interruptions and the system’s capacity to manage inrush current. Each type has its advantages and limitations, making them suitable for different applications.
13. A closed transition, also known as a “make before break” transfer, operates differently from open transition. In a closed transition, the automatic transfer switch establishes a connection to the new power source before disconnecting from the old one. This means that there is no gap between disconnection and connection, ensuring that downstream loads receive uninterrupted power throughout the transition.
14. Closed transitions typically occur automatically as soon as both power sources are closely synchronized in phase, voltage, and frequency. During this process, both sources are simultaneously connected, or “paralleled,” for a brief period, usually lasting no more than 100 milliseconds, to comply with local utility interconnect requirements.
15. Advantages:
16. Disadvantages:
17. Closed transitions offer advantages such as continuous operation of critical loads and potential cost savings but may require more sophisticated equipment and careful consideration of utility requirements and equipment ratings.
18. There are three types of witching Mechanisms of ATS.
19. Contactor switching mechanisms are one of the two basic types of low-voltage switching mechanisms used in transfer switches. These mechanisms are commonly used due to their affordability and versatility. They function as double-throw switches, where a single operator can open one set of power contacts while simultaneously closing another set. It’s important to note that in an open transition design, a mechanical interlock is often included to prevent both contact sets from closing simultaneously, whereas this interlock is absent in a closed transition design.
20. Advantages:
21. Disadvantages:
22. Contactor switching mechanisms are versatile and budget-friendly but may require additional protective devices for fault handling and have limitations in terms of withstand close-on ratings.
23. Molded case switching mechanisms are another type of low-voltage switching mechanism used in transfer switches. These mechanisms are designed to close and interrupt circuits between separable contacts, operating under both normal and abnormal conditions. Molded case switches feature a straightforward design and can support either manual operation via an over-center toggle or motorized operation. They are typically housed in insulating material enclosures.
24. In automatic transfer switch applications, a pair of molded case switches is operated through a common mechanical linkage, which can be controlled either manually or automatically. When overcurrent protection is required, molded case circuit breakers equipped with a thermal-magnetic trip element are used.
25. Advantages:
26. Disadvantages:
27. Molded case switching mechanisms offer the advantage of self-protecting contacts and high WCR at lower amperages, making them suitable for applications where integral overcurrent protection is required. However, they are typically more costly and do not support certain transition types.
28. Power case switching mechanisms are a robust and high-capacity type of low-voltage switching mechanism used in automatic transfer switches. These mechanisms are larger, faster, and more powerful compared to molded case mechanisms, capable of handling amperages up to 5,000 amps. They utilize two-step stored energy technology, enabling both mechanical and electrical operation. Some models of power case mechanisms also feature integral overcurrent protection, similar to molded case designs.
29. Advantages:
30. Disadvantages:
31. Power case switching mechanisms offer a high level of flexibility and protection, making them suitable for applications requiring precise coordination and protection against large fault currents. However, their larger size and cost should be considered when selecting them for specific applications.
32. Transfer switches can operate in various modes to manage the initiation and completion of power transfers between different sources. These operation modes provide flexibility and options for different applications. Here are the key operation modes:
33. Each operation mode has its own set of advantages and disadvantages, making them suitable for different applications based on factors like cost, criticality of loads, and safety requirements. The choice of mode depends on the specific needs and priorities of the installation.
34. When selecting an Automatic Transfer Switch (ATS) for a specific application, there are several critical considerations to keep in mind to ensure the switch meets the needs and safety requirements of the system. Here are some key considerations:
35. Application:

Determine the application for the ATS, such as utility-to-generator (Utility-Gen), generator-to-generator (Gen-Gen), or utility-to-utility (Utility-Utility). The application will dictate the type of ATS needed.

2. Service Entrance vs. Non-Service Entrance:
3. Decide whether the ATS will serve as a service-entrance switch, which connects to the utility service entrance, or a non-service-entrance switch, used for internal load distribution.
4. Switch Type:

Choose the appropriate switch type based on your requirements. Options include Transfer Switches, which transfer power between sources, and Bypass Isolation Switches, which provide redundancy and maintenance capabilities.

4. Transition Type:
5. Determine the transition type needed—open, closed, or non-automatic. The transition type impacts how the switch transfers power between sources.
6. Grounding Schemes:

Select the grounding scheme that aligns with your system’s requirements, whether it’s separately derived or non-separately derived grounding.

6. Switching Capacity:
7. Decide whether a 4-pole or 3-pole ATS is required. 4-pole switches are necessary for certain grounding and safety considerations, as mentioned earlier.
8. Switch Positions:

Consider the number of switch positions (2-positions, 3-positions) needed. 3-positions can be beneficial for load shedding and managing stored energy loads.

8. Cable Sizes and Entry Requirements:
9. Determine whether the ATS requires top entry or bottom entry for cables and ensure it accommodates the cable sizes used in your system.
10. Enclosures:

Select an appropriate enclosure type (e.g., NEMA Type 1, 3R, 4, 4x, 12) based on the environmental conditions and protection requirements of the installation site.

10. Voltage and Frequency:
    Ensure that the ATS is rated for the voltage and frequency of your electrical system (e.g., 600VAC, 480VAC, 50Hz, 60Hz).
11. Current Rating:
    Determine the required current rating of the ATS (e.g., 3000A, 2000A, 800A) to handle the load demands of your system.
12. Fault Current Capability:
    Consider the fault current capability (WCR) needed to protect the ATS and the connected equipment in the event of a fault (e.g., 65kA, 85kA, 100kA).
13. Codes and Standards:
    Ensure that the ATS complies with relevant codes and standards, including UL/CSA, NFPA, NEMA, ISO, EN, or any other applicable regulations in your region.

By carefully considering these factors, you can choose the right ATS for your specific application, ensuring reliable and safe power transfer between sources.

FAQs about Automatic Transfer Switch:

Codes and Standards for Automatic Transfer Switch

Automatic transfer switches must follow to various codes and standards to ensure their safe and reliable operation. Some of the key codes and standards relevant to automatic transfer switches include:

1. NFPA 70, National Electrical Code (NEC): This code covers the installation and use of electrical equipment and systems, including automatic transfer switches. It provides guidelines for safe and compliant electrical installations and includes specific articles related to emergency and standby power systems (Articles 700, 701, 702, and 708).
2. NFPA 110, Level 1, Type 10: NFPA 110 is a standard for Emergency and Standby Power Systems. While this standard primarily addresses the entire emergency power system, including generators and transfer switches, it sets important requirements for the design and operation of automatic transfer switches within these systems.
3. NFPA 99, Standard for Health Care Facilities: NFPA 99 is specifically applicable to healthcare facilities and outlines requirements for the electrical systems in these settings. Automatic transfer switches used in healthcare facilities must meet the standards outlined in NFPA 99 to ensure patient safety and uninterrupted power supply.
4. UL 1008: Underwriters Laboratories (UL) 1008 is a leading safety standard specifically for transfer switch equipment. It outlines stringent testing requirements to verify the safety and performance of transfer switches. Some of the tests included in UL 1008 are the temperature rise test, dielectric voltage-withstand test, overload test, contact opening test, endurance test, short-circuit test, and more. These tests help ensure that transfer switches can safely and reliably transfer power between sources.

Read Also: Solar Power Plant Construction and Working [PDF]

To Download PDF of this article please EnterEnterCtrlCtrl+Ctrl+P