What is FDD Frame Structure?
Frequency Division Duplex (FDD) is a method used in wireless communications to separate the uplink and downlink transmissions by using different frequency bands. In…
Read articlePakTechPoint
Browse 748 free articles, standards and practical guides about PakTechPoint.
748 articles in this topic
What is Spectrum Planning of LTE?
All radio spectrum is typically controlled by each country’s regulatory organization (e.g. Federal Communication Commission in the US). In some cases and some countries…
Read articleCell Edge Data Rates in LTE Networks
Cell edge data rates refer to the data rates experienced by users located at the outer boundaries of a cell. These users are typically…
Read articleAdvertisement
LTE Reselection Parameters.
Reselection parameters in LTE networks help determine when a UE should switch from one cell to another. Following is list of LTE reselection parameters…
Read articleLTE Cell Selection Parameters.
In LTE networks, cell selection parameters play a crucial role in determining whether a User Equipment (UE) can camp on a specific cell. Here…
Read articleWCDMA HSDPA/HSUPA Dimensioning
Upon completion of this article, the learners will be able to: This article provides an overview of High Speed Downlink Packet Access (HSDPA) and…
Read articleLTE Network Tunning
Upon completion of this article, you will be able to: 1. Basic Process of LTE Network Optimization. The main target of network tuning is…
Read articleDrive Test Optimization Process of 3G/UTRAN.
There are following processes of 3G/UTRAN drive test optimization. 1. Perform site readiness checks. The Site Readiness procedures are health checks that ensure all…
Read articleWhat are UTRAN Protocols? Optimization Concepts
Below is the big picture of UTRAN protocols. The Uu Interface in 3G/UTRAN. The Uu interface in 3G (specifically within the UTRAN, or UMTS…
Read articleWhat is RF Optimization? 3G or UTRAN.
RF (Radio Frequency) Optimization is a crucial process in wireless communication networks, aimed at enhancing the performance, coverage, and capacity of the network. It…
Read articleInterference Margin (IM) in 5G
Interference Margin (IM) is essential for ensuring reliable communication in wireless networks. In 5G, IM is reserved to overcome for increased noise due to…
Read articleWhat is 5G Spectrum? 5G Spectrum Architecture & Planning
The existing spectrum is insufficient to meet users’ increasing demands for higher experience rates, ultimate peak rates, massive connections, low latency, and high reliability.…
Read article