Magnetic Flow Meter Material Selection Criteria Design

This article is about Magnetic Flow Meter Material Selection Criteria Design for Flow Measurement of Instrumentation and Control Systems as per International Codes and standards for Commercial Buildings, Plants and Refinery Projects.

Magnetic Flow Meter Material Selection Criteria Design

Material Receiving General Checklist for Instrumentation & Control

General Requirements

The meter factor data shall be provided by the manufacturer. (PIP PCCFL001 Sec. 3.9.5)

Purchase Order and Instrument specification sheet criteria shall be confirmed and compared with instrument stainless steel tags / labels and nameplates, all possible visual checks and shipment checked for damage, prior to acceptance of the shipment.
Verify that all the instruments are from technically acceptable vendors (Attachment 1).
Materials of construction shall be compatible with the process fluid. (PIP PCCFL001 Sec. 3.9.3).
Magnetic Flow meters shall be Smart type. (PIP PCCFL001 Sec 3.16.4)

International Codes and Standards for Magnetic Flow Meter

1. Flow Nozzle Material Selection Criteria Design & Flow Measurement
2. Venturi Tube Material Selection Criteria Design & Flow Measurement

3. SAES-J-002 – Technically acceptable instruments, 23 June 2008
4. SAES-J-003 – Instrumentation Basic Design, 16 January 2008
5. SAES-J-100 – Process Flow Metering, 05 April 2008
6. PIP PCCFL 001 – Flow Measurement Criteria , August 2006, Process Industry Practices Process Control

1. Attachment 1: Technically Acceptable Instruments, SAES-J-002.