Radio Communication Equipments Material Selection Criteria

This article is about Radio Communication Equipments Material Selection Criteria of Communications Systems as per International Codes and standards.

Telecommunication Equipments Material Selection Criteria

Verify that all received premise equipment are inspected for damage and for conformance to all applicable requirements, including the supplier inspection release with verified Material Test Reports (MTR).
Verify that the premise equipment procedures for handling, storage, and preservation of material as specified in all applicable specifications, manufacturer recommendations and International codes and standards.
Verify that the premise equipment and accessories received comply with applicable standards and specifications prior to release to be used as part of the work.
Verify that the premise equipment and accessories are in accordance with the approved project-specific design drawings, diagrams, schedules, lists, databases, and associated design documents.
Verify and ensure that the received premise equipment matches the purchase order and labeled with part number and product description.
Components shall comply with project requirements and specification.
All radio equipments that are mentioned in this standard must conform to all government requirements for importation of radio telecommunication equipment into the Kingdom.
Verify that VHF/UHF radio systems operated in classified areas is certified by Factory Mutual Research Corp.(FM) or any other association listed in paragraph 5.2.2 of SAES-P-100, “”Basic Power System Design
Criteria”” for either: Class 1, Division 1, Gas Groups C&D (Ethylene & Propane).
Class 1, Division 2, Gas Groups A, B, C & D (Acetylene, Hydrogen, Ethylene & Propane). Or
Class 1, Zone 1, Gas Groups IIb (Ethylene & Propane).
Class 1, Zone 2, Gas Groups IIc (Acetylene, Hydrogen, Ethylene & Propane).”
Verify that the communications base station antennas conforms with the minimum standard is per EIA/TIA 329-B.
and the Vehicular Antennas is as per EIATIA 329-B-1.”
Ensure that traceability of the premise equipment is maintained as specified in International codes and standards and manufacturer’s specifications throughout fabrication, erection, installation, repair, modification and use of the item.