SAUDI ARAMCO, API, ASME AND ASTM Standards for QC Engineers

This article is about SAUDI ARAMCO, API, ASME AND ASTM International Standards and Codes for QC Engineers related to topic of Quality system inspection for Petrochemical plants. This documents and notes can be useful for who are attending CBT Aramco Test or other international test for QC Inspector or Engineer.

SAUDI ARAMCO, API, ASME AND ASTM Standards for QC Engineers

1. SCHEDULE “Q” Contractors Quality Requirements.
2. SAER 1972 Inspection Requirement (SA Material Inspection & Testing).
3. G.I 0002.102 General Instruction Pressure Testing Safety.
4. SAES-A-004 General Requirements for Pressure Testing.
5. SAES-A-005 Safety Instruction Sheet.
6. SAES-A-007 Hydrostatic Testing Fluid & Lay-up Procedure.
7. SAES-L-105 Piping Material Specification.
8. SAES-L-108 Selection of Valves.
9. SAES-L-109 Selection of Flanges, Stud Bolts and Gasket Piping.
10. SAES-L-110 Limitation of Pipe joint & Component.
11. SAES-L-150 Pressure Testing of Plant Piping & Pipeline.
12. SAES-L-125 Safety Instruction Sheet for Piping & Pipeline.
13. SAES-L-310 Design of Plant Piping.
14. SAEP-351 Bolted Flange Joint Assembly.
15. SAES-L-350 Construction of Plant Piping.
16. SAES-L-410 Design of Pipelines.
17. SAES-L-450 Construction of On-land & Near-shore Pipelines.
18. SAES-W-010 Welding Requirement for Pressure Vessel.
19. SAES-W-011 Welding requirement for On Plot Piping.
20. SAES-W-012 Welding requirement for Pipelines.
21. SAES-W-014 Weld Overlays and Welding of Clad Materials.
22. SAES-H-001 Selection Requirements for Industrial Coating.
23. SAES-H-100 Painting Requirements for Industrial Facilities.
24. SAES-H-101 Approved Protective Coating Systems.
25. SAES-G-005 Centrifugal Pumps.
26. SAES-G-006 Positive Displacement Pumps-Controlled Volume.
27. SAES-D-001 Design Criteria for Pressure Vessel.
28. SAES-M-001 Structural Design Criteria.
29. SAES-B-006 Fireproofing for Plants.
30. ASTM A780 Repair of Damaged and Uncoated Areas on Hot Dip Galvanized.
31. ASTM A123 Standard Specification for Zinc (Hot Dip Galvanized) Coatings on Iron and Steel.
32. 12-SAMSS-007 Fabrication of Structural and Miscellaneous Steel.
33. 12-SAMSS-008 Erection of Structural and Miscellaneous Steel.
34. 31-SAMSS-004 Centrifugal Pumps.
35. 31-SAMSS-009 Positive Displacement Pumps-Controlled Volume.
36. 01-SAMSS-017 Auxiliary Piping for Mechanical Equipment.
37. 32-SAMSS-011 Manufacture of Air-Cooled Heat Exchangers.
38. 04-SAMSS-048 Valve Inspection and Testing Requirements.
39. 32-SAMSS-020 Manufacture of Trays and Packing.
40. 32-SAMSS-022 Manufacture of Components for Flare Systems.
41. 31-SAMSS-004 Centrifugal Pumps.
42. 32-SAMSS-004 Manufacture of Pressure Vessel.
43. SAES-A-206 Positive Material Identification.
44. SAES-B-054 Access, Egress & Material Handling for Plant Facilities.
45. SAES-B-053 Mach. Safety Guarding, Elevators, Escalators & Conveyors.
46. SAES-M-001 Structural Design Criteria for Non-Building Structures.
47. SAES-C-001 Process Design of Trays & Packing.
48. SAES-J-200 Pressure…
49. SAES-J-300 Level…
50. SAES-J-400 Temperature….
51. SAES-F-007 System Design Criteria for Flares.
52. SAES-J-600 Pressure Relief Devices.
53. SAES-B-067 Safety Identification & Safety Colors.
54. SAES-N-101 Basic Criteria, Industrial Insulations.
55. SAEP-20 Equipment Inspection Schedule.
56. SAES-M-001 Structural Design Criteria.
57. SAIC-M-2007 Structural Alignment Inspection Checklist.
58. SATR-M-2002 Structural Alignment Test Report.
59. SAIC-M-2009 Structural Bolt Tightening.
60. SATR-W-2008 Weld Summary Report.
61. API-610 Centrifugal Pumps for Petroleum, Heavy Duty Chemicals and Gas Industry Services.
62. API-614 Lubrication, Shaft Sealing & Control Oil Systems.
63. API-661 Air-Cooled Heat Exchangers & Components.
64. API-675 Positive Displacement Pumps-Controlled Volume.
65. API-686 Recommended Practices for Machinery Installation and Installation Design.
66. API-1104 Welding of Pipelines and related facilities.
67. API-598 Valve Inspection and testing.
68. API-570 Piping Inspection Code.
69. API-577 Welding Inspection and Metallurgy.
70. API RP-1110 Pressure Testing of Liquid Petroleum Pipeline.
71. ASME-B31.1 Power Piping.
72. ASME-B31.2.
73. ASME-B31.3 Process Piping.
74. ASME-B31.4.
75. ASME-B31.5.
76. ASME-B31.8.
77. ASME-B31.9.
78. ASME-Section VIII Rules for Construction for Pressure Vessels.

CENTRIFUGAL / POSITIVE DISPLACEMENT PUMP REFERENCE STANDARDS

– SATIP-G-005-01         Centrifugal Pump.
– SATIP-G-006-01         Positive Displacement Pump.
– SATIP-G-115-01         Lubrication, Shaft Sealing & Oil System.

– SAIC-G-2002             Receiving inspection of Centrifugal Pump.
– SAIC-G-2003             Handling, Storage & Inspection of Centrifugal Pump.
– SAIC-G-2004             Inspection of Auxiliary Piping Installation.
– SAIC-G-2005             Inspection of Pump Suction & Discharge Piping Con.
– SAIC-G-2021             Mounting Plate Installation & Leveling for Pumps.
– SAIC-L-2014              Inspection of Bolted Flanges Joint Assembly.
– SAIC-G-2022          Final Pump / Driver Alignment.
– SAIC-G-2007  Final Inspection / Walk through (By Contractor).
– SAES-G-005  Centrifugal Pumps.
– SAES-B-054   Access, Egress & Material Handling of Plant Facility.
– SAES-B-053   Machine Safety Guarding, Elevators, Escalators.
– 31-SAMSS-004 Centrifugal Pumps.
– 31-SAMSS-009  Positive Displacement Pump Controlled Volume.
– 01-SAMSS-017  Auxiliary Piping for Mechanical Equipment.
– Schedule “Q”  Saudi Aramco Quality Requirements.
– API 610  Centrifugal Pumps for Petroleum, Heavy Duty  Chemical and Gas Industry Services.
– API 675  Positive Displacement Pump Controlled Volume.

COATING REFERENCE STANDARD

SAES-H-001  Selection Requirements for Industrial Coating.
SAES-H-100  Painting Requirements for Industrial Facilities.
SAES-H-101  Approved Protective Coating Systems.

COMPRESSOR REFERENCE STANDARDS

– SATIP-K-402  Centrifugal Gas Compressor.
– SATIP-K-403   Reciprocating Compressor for Process Air & Gas.
– 31-SAMSS-001 Centrifugal Compressor.
– 01-SAMSS-017  Auxiliary Piping for Mechanical Equipment.
– API 617  Centrifugal Compressor for Petroleum, Chemical.
– Schedule Q   Contractor Quality Requirements.
– API 618  Reciprocating Compressor for Petroleum, Chemical.

HEAT EXCHANGER REFERENCE STANDARDS

– SATIP-E-004  Heat Exchanger Installation-Shell & Tube.
– SAES-E-004 Design of Shell & Tube Heat Exchangers.
– 32-SAMSS-007 Manufacture of Shell & Tube Heat Exchanger.
– SAES-H-100  Coating Materials & Application Requirements.

AIR COOLED HEAT EXCHANGER ( FIN FAN COOLER) REFERENCE STANDARD

– SATIP-E-007-01  Air Cooled Heat Exchanger (Fin Fan Cooler).
– SAES-E-007  Design Criteria of Air Cooled Heat Exchanger.
– 32-SAMSS-011  Manufacture of Air Cooled Heat Exchanger.
– API 614  Lubrication, Shaft Sealing & Control Oil System.
– Schedule Q Contractor Quality Requirements.
– SAES-H-100 Painting Requirements for Industrial Facilities.

ON-PLOT METALLIC PIPING INSTALLATION REFERENCE STANDARDS

– SATIP-L-351-01 On-Plot Metallic Plant Installation (Excluding Brazed Piping)
– SAES-L-100  Applicable Code & Standard for Pressure Piping System
– SAES-L-102 Piping Material Specification
– SAES-L-108 Selection of Valve
– SAES-L-109  Selection of Flanges, Stud Bolts and Gasket Piping…
– SAES-L-110 Limitation of Pipe joint & Component
– SAES-L-150 Pressure Testing of Plant Piping & Pipeline
– SAES-L-125 Safety Instruction Sheet for Piping & Pipeline
– SAES-L-310 Design of Plant Piping
– SAES-L-350  Construction of Plant Piping
– SAEP – 351  Bolted Flange Joint Assembly

Quality Control Mechanical Interview Questions | CBT Aramco

PIPING QC CBT QUESTIONS | FLANGE JOINT TIGHTENING METHODS

Piping QC Notes CBT Aramco | PIPE FIT-UP AND TOLERANCES

Piping QC Notes & CBT Aramco | Piping Erection & Installation

For more knowledge please check Ebooksterminal.com