SUBMERGED ARC WELDING PROCESS SAW PROCESS
SUBMERGED ARC WELDING (S.A.W) PROCESS This process uses Constant Voltage Power Supply (or) Flat Characteristic and Polarity used in this Process is D.C.E.P.The arc…
Read articleCSWIP NDT WELDING
Browse 67 free articles, standards and practical guides about CSWIP NDT WELDING.
67 articles in this topic
METAL INERT GAS WELDING – METAL ACTIVE GAS WELDING
METAL INERT GAS / METAL ACTIVE GAS WELDING MIG / MAG welding are also called as Gas Metal Arc Welding Process (G.M.A.W). This process…
Read articleTUNGSTEN INERT GAS WELDING – GAS TUNGSTEN ARC WELDING
TUNGSTEN INERT GAS WELDING (OR) GAS TUNGSTEN ARC WELDING: Tungsten Inert Gas Welding (T.I.G) is also called as Gas Tungsten Arc Welding. (G.T.A.W).This process…
Read articleAdvertisement
MANNUAL METAL ARC WELDING MMA WELDING
MANNUAL METAL ARC WELDING (M.M.A) OR SHIELDED METAL ARC WELDING (S.M.A.W) Manual Metal Arc Welding is also called as Shielded Metal Arc Welding. This…
Read articleINTRODCTION TO WELDING PROCESS
Heat Input = Amps x Volts/ Travel Speed x 1000 kj/min. Unit of Travel speed is mm/sec. Heat input is mainly influenced by Travel…
Read articleWELDING IMPERFECTIONS
Deviation from Ideal Weld is called Imperfection Unacceptable imperfection is called Defect. Crater Cracks are found only on Weld Metal. Solidification Cracks are formed…
Read articleDUTIES OF WELDING INSPECTOR
. Welding Inspectors are employed to assist with the quality control activities that are necessary to ensure that welded items will meet specified requirement…
Read articleWELDING TERMS AND DEFINATIONS
A union between materials caused by heat and (or) Pressure is called a weld. A configuration of member is called a JOINT. Combination of…
Read articleDESTRUCTIVE TESTING WELDING
HARDNESS: The ability of material to resist Indentation. It is effected by adding carbon. TOUGHNESS: The ability of material to absorb Impact Energy. It…
Read articleWELDING PROCEDURE QUALIFICATION AND WELDER’S QUALIFICATION
EN-287 (A.S.M.E SECTION IX) → Welders Qualification. E.N- 288 → Procedure Qualification. A.W.S – D -1.1 → Structural Welding of Steel. A.W.S – D…
Read article
WELDING INSPECTOR DUTIES & WELDING INSPECTOR RESPONSIBILITIES
Main keywords for this article are WELDING INSPECTOR DUTIES, WELDING INSPECTOR RESPONSIBILITIES, HYDROGEN CRACKING, welding, HAZ Microstructure, To avoid HAZ Hydrogen cracking. WELDING INSPECTOR…
Read article
STRIP CLADDING SUBMERGED ARC STRIP CLADDING ELECTROSLAG STRIP CLADDING
INTRODUCTION TO STRIP CLADDING Cladding is a welding process in which a material with desired properties is deposited on the surface of a base…
Read article