This article is about Panel Controller Pneumatic/Electronic Commissioning Checklist.
Panel Controller Pneumatic/Electronic Commissioning Checklist
Following are commissioning checklist of Panel Controller Pneumatic/Electronic.
Panel Controller Pneumatic Commissioning Checklist
- Instrument verified per specification sheet.
- Tubing as per instrument pneumatic hookup.
- Pneumatic lines leak checked.
- Pneumatic lines continuity checked.
- Air supply:
- Provided
- Blown down
- Set at correct pressure
- Shutoff provided
- Controller calibrated per manufacturer’s instruction manual.
- Instrument set point at 50% PB 100%: input ranged – output OK.
- Instrument PB 100% input 50%: set point ranged – auto output OK.
- Reset introduced: output responds correctly.
- Rate introduced: input step changed – output responds correctly.
- Controller checked for offset.
- Output ranged on manual. Correct valve(s) responds.
- Chart/scale factors correct.
- Tagged properly.
Panel Controller Electronic Commissioning Checklist
- Instrument verified per specification sheet.
- Wiring as per instrument loop drawing.
- Wiring polarity checked.
- Wiring continuity checked.
- Power supply(s) correct and adjusted.
- Controller calibrated per manufacturer’s instruction manual.
- Instrument set point at 50% PB 100%: input ranged – output OK.
- Instrument PB 100% input 50%: set point ranged – auto output OK.
- Reset introduced: output responds correctly.
- Rate introduced: input step changed – output responds correctly.
- Controller checked for offset.
- Output ranged on manual. Correct valve(s) respond.
- Chart/scale factors correct.
- Tagged properly.
Following are more commissioning checklist for Electrical and Instrumentation.
Control Valve Commissioning Checklist
Switch Valves, TSA, and PSA Valves Commissioning Checklist
Pressure Transmitter Commissioning Checklist
Temperature Transmitter (Filled System) Commissioning Checklist
Differential Pressure Transmitter Commissioning Checklist
Displacement Level Instrument Commissioning Checklist
Multipoint Recorder Commissioning Checklist
Orifice Plate/Flow Nozzle Commissioning Checklist
Analyzers Commissioning Checklist
Machine Controls Commissioning Checklist & Instrumentation
Vibration Monitors Proximity/Inertia Commissioning Checklist
Surge Control System Commissioning Checklist
Thermocouple RTD and Well Commissioning Checklist
Alarm Switches Commissioning Checklist
Locally Mounted Controller Commissioning Checklist
Panel Controller Pneumatic/Electronic Commissioning Checklist
Panel Controller Pneumatic/Electronic Commissioning Checklist
Signal Modifiers Electronic and Pneumatic – Commissioning Checklist
PLC | DCS | Power Supply Systems Commissioning Checklist