ARAMCO STANDARD SAES-P-111 Grounding

by · Published · Updated

This article is about ARAMCO STANDARD SAES-P-111 Grounding and focusing to the engineers, technicians and supervisors. You will find lot of documents related to this article. Just navigate our website  www.paktechpoint.com  and find more articles. Please! Do not forget to subscribe our You tube channel also. Thanks in Advance.

PLEASE SUBSCRIBE OUR PAKTECHPOINT YOUTUBE CHANNEL

Following contents to be discussed in PDF file and reference pages of  topics.

  1. International Grounding References
  2. Materials and Installation for grounding
  3. Substation Grounding
  4. Grounding Electrodes
  5. System Grounding
  6. Equipment Grounding
  7. Offshore Platform Grounding
  8. Fence Grounding
  9. Tank Grounding
  10. Lightning Protection
  11. Static Electricity Grounding
SAES-P-111

 

 

Index of Electrical Standards International

1.    ARAMCO STANDARD SAES-P-100 BASIC POWER SYSTEM DESIGN CRITERIA
2.    ARAMCO STANDARD SAES-P-101 Regulated Vendors List for Electrical Equipment
3.    ARAMCO STANDARD SAES-P-103 UPS AND DC SYSTEM
4.    ARAMCO STANDARD SAES-P-104 Wiring Methods and Materials
5.    ARAMCO STANDARD SAES-P-107 Overhead Distribution Systems
6.       ARAMCO STANDARD SAES-P-111 Grounding
7.    ARAMCO STANDARD SAES-P-113 Motors and Generators
8.    ARAMCO STANDARD SAES-P-114 Power System Protection and Control
9.    ARAMCO STANDARD SAES-P-116 Switchgear and Control Equipment
10.   ARAMCO STANDARD SAES-P-119 SUBSTATION
11.  ARAMCO STANDARD SAES-P-121 TRANSFORMERS AND REACTORS
12.  ARMACO STANDARD SAES-P-123 LIGHTING
13.  ARAMCO STANDARD SAES-P-126 Power System Automation

Tags:

You may also like...

7 Responses

  1. foloren torium says:
    February 5, 2019 at 12:44 am

    Hey, you used to write magnificent, but the last few posts have been kinda boring… I miss your tremendous writings. Past several posts are just a bit out of track! come on!

    Reply
  2. Viki Juhnke says:
    February 6, 2019 at 2:38 pm

    I wanted to thank you for this great read!! I definitely enjoying every little bit of it I have you bookmarked to check out new stuff you post…

    Reply
  1. PROCEDURE FOR INSTRUMENT BRANCH CABLE TRAY INSTALLATION - PAKTECHPOINT
    January 6, 2019

    […]  All installation requirements and tolerances shall be in accordance with the technical specification, the latest construction drawings and the applicable documents shall be SAES-J-902, NEMA VE-2, SAES-P-104 and SAES-P-111. […]

  2. WORK PROCEDURE FOR SPLICING AND TERMINATION OF LOW VOLTAGE CABLES - PAKTECHPOINT
    March 6, 2019

    […] conductors, except as indicated in paragraphs 8.2.3 to 8.2.5 below, and except as specified in SAES-P-111 for grounding conductors. The use of solder lugs is prohibited. Compression terminal connectors for […]

  3. LIGHTNING PROTECTION SYSTEM INSTALLATION PROCEDURE - PAKTECHPOINT
    March 8, 2019

    […] cables, connectors, copper tape and other miscellaneous materials shall be as required in SAES-P-111 para-5 and complies with Aramco standard and […]

  4. SOLO RUN TEST FOR MV AND LV MOTORS - PAKTECHPOINT
    March 9, 2019

    […] shall be checked to ensure it is as per the detail drawing and installed in accordance with SAES-P-111. Testing for motor grounding is necessary by using earth resistance teat or equivalent as in […]

  5. RACKS CONSOLE CABINETS INSTALLATION IN PIB
    March 24, 2019

    […] Bond the equipment’s/ panels/ racks to its dedicated safety grounding bus-bar as described in SAES-P-111. […]

Leave a Reply

Your email address will not be published. Required fields are marked *