Protected Membrane Roofing Types, Materials, and Installation
APP-modified Bituminous Sheet APP modified bituminous sheet shall be torch applied, 2-ply, of APP180, as manufactured by Firestone Building Products in accordance with ASTM…
Read articleBuilding Architecture Notes
Building Architecture is both the process and the product of planning, designing, and constructing buildings or other structures. Here we are providing construction, maintenance, commissioning notes and articles for Building Architecture Notes for engineers and technicians and professionals.
42 articles in this topic
Protected Membrane Roof Quality Control Guidelines
Prior to installing final surfacing (gravel or pavers) and insulation, the following roof leak test shall be performed: a. Three (3) days prior to…
Read articleProtected Membrane Roof Installation Guidelines
Substrates, areas, and conditions shall be examined with installer present, for compliance with the following requirements and any other conditions affecting performance of roofing…
Read articleAdvertisement
Built-Up Roofing Systems (BUR) | Building Architecture
This article is for Built–up roofing, which is called BUR also. For Low-slope roofs it is the most common roofing material method. It is composed…
Read articleBuilt-Up Roofing Quality Assurance Guidelines
Installer (Contractor) shall be approved, authorized, or licensed by roofing system manufacturer to install manufacturer’s product, and eligible to receive manufacturer’s warranty. Manufacturer shall…
Read articleBuilt-Up Roofing Types, Materials, and Installation
Built–up roofing, also called BUR, is the most common roofing material used on low-slope roofs. It is composed of alternating layers of reinforcing fabric and bitumen (asphalt)…
Read articleBuilt-up Roofing Quality Control Guidelines | How to Inspect
This article is related to Built-up Roofing and installation and what installation quality points to be checked. How to Inspect Built-up Roofing during construction…
Read articleBuilt-Up Roofing Installation Procedure
Substrates, areas, and conditions shall be examined with installer present, for compliance with the following requirements and other conditions affecting performance of roofing system:…
Read articleLoad Bearing Exterior Masonry Walls Dimensional Limitations
Following topics to be discussed in this article are 1. SCOPE 2. REFERENCES 3. GENERAL 3.1 Lateral Support 3.2 Code Requirements 4. REVISION HISTORY…
Read articleMasonry Wall Joint Type and Locations | Architecture Works
Following topics to be discussed in this article are 1. SCOPE 2. REFERENCES 3. TYPES OF JOINTS 3.1 Control Joints 3.2 Expansion Joints 4.…
Read articleInstallation of Joint Sealants | Types | Joint Sealant Application
Following topics to be discussed in this article are 1. SCOPE 2. REFERENCES 3. GENERAL 3.1 Joint Sealant Application 3.2 Performance Requirements 3.3 Submittals…
Read articleQuality Assurance Checklist for Joint Sealants
Installer shall be experienced and be specialized in installing joint sealants similar in material, design, and extent to those indicated for proposed project, and…
Read article