Lightning Protection Technical Specification – Electrical Design
This article describes the requirements for safeguarding of personnel and equipment from hazards associated from exposure to lightning, more will …
Instrument Design
Temperature Element Wiring Installation Procedure of Cold Box/Can
This technical specification defines design and fabrication requirements for all cold box/can temperature-element wiring installations. More Explanation About Selection of Temperature Elements, Methods of Conduit Installation, Electrical Terminal Box, Choosing Cable/wire for Coldbox Temperature Elements, Testing of Temperature Elements and Functional Check for Rtds and Thermocouples.
Instrument Manifold Valves and Minimum Technical Requirements
1. Purpose – This article is about types of manifold valves, manifold valve manufacturer, manifold valve for pressure gauge, 5 …
Cryogenic Butterfly Control Valves | Symbol | Flow Characteristics | Parts
This article is about design requirements for the fabrication and installation of Cryogenic Butterfly Control Valves as per international standards and codes, Butterfly Control Valves Symbol, Butterfly Control Valves Flow Characteristics and Parts of Butterfly Control Valves.
Design Standard for Pneumatic Systems | Instrumentation
1. Purpose – This article is about Design Standard for Pneumatic Systems for instrumentation system and all technical requirements for …
Instrument Air Supply Piping Technical Specification
This fabrication and erection technical specification specifies for instrument contractors acceptable materials of construction for instrument air supply systems with design pressures no greater than 10.3 bar g (150 psig).
Instrument Design Checking Procedures
This article is about Instrument Design Checking Procedures and checking of Instrument Location Drawings, Control Panels, Instrument Hook-Up Details, Analyzer Panels, Field Instrument Support Details, Instrumentation Bill of Material, Instrumentation Index.
Electrically Traced Tubing for Instrument Service | Design | Selection
1. Purpose -This engineering article defines the criteria for the selection of steam-traced tubing in instrument service. 2. SCOPE – …