Browse 1959 free articles, standards and practical guides about PakTechPoint.
1,959 articles in this topic
Pre-Installation Requirements Inspect exterior and interior of sign for damage. Visually inspect power terminations within sign at main lugs and power supplies. Verify that…
Read articleTesting Procedures Fiber Optic Cable Testing OTDR Testing Procedure Test Fiber Optic Cable shall include Optical Time Domain Reflectometer (OTDR) tests, Coarse Wave Division…
Read articleThis method statement will cover the minimum requirements for installation of static machinery, such as reactor, columns, drums, shell & tube exchanger, packages equipment,…
Read articleThis Procedure / Method Statement will serve as a minimum guidelines to carry out the vessel dress-up activities in plants and refineries. The following keywords…
Read articleIndustry Codes and International standards for Erection of Reciprocating Compressor REIE 686 Recommended Practices for Machinery Installation and installation design Pl-618 Reciprocating compressor for…
Read articleCurrent transformer (CT) test procedure This test is considered as one of the main test, it’s aimed to test: Current transformer ratio. Current transformer…
Read articleThis test aimed to test relay’s output contact, pick-up and drop off voltage, operating and resetting time. Required equipment for Auxiliary Relay Test Sverker…
Read articleThe wire and cable provided and installed by the contractor shall be according to the contract drawings and this paragraph. All wire and cable…
Read articleMotor Starters and Contactors Magnetic starters provided by the contractor shall be minimum NEMA Size 1, complete with thermal overload relay heater element for…
Read articleGround rods shall have a copper surface over a steel center 19 mm (3/4 in) in diameter (Copper-weld type). When rods longer than 3…
Read articleTerminal Lugs All terminations shall be self-tested after installation by pulling on wire with a moderate force to ensure the integrity of crimped lug…
Read articleThe contractor’s responsibility shall include, but is not limited to, the following: The contractor shall provide with written acceptance of all furnished cable reels.…
Read article
