Browse 1959 free articles, standards and practical guides about PakTechPoint.
1,959 articles in this topic
This guideline contains recommendations for installing Bently Nevada transducers and monitoring systems on reciprocating compressors. These recommendations apply to both new machines and to existing…
Read articleThe design philosophy for most reciprocating machines is to minimize the unbalanced inertial and pressure forces and to absorb the remainder of the energy…
Read articleValve Temperature Monitoring using 3300/75 Reciprocating Compressor Valve Temperature Monitors, Resistance Temperature Detectors (RTDs) and Transducer Interface Modules (TIMs) Suction and discharge valves are…
Read article, Proximity Transducers and a Keyphasor® transducer Horizontal reciprocating compressors usually have rider bands to minimize wear of the piston rings and to eliminate…
Read articleHigh Temperature Monitoring using 3300/30 or 3300/35 6-channel Temperature Monitors or 3300/36 2-channel Temperature Monitors There are additional temperature measurements that should be continuously…
Read articleTools and equipment needed should be in good condition and must be checked by Supervisor / Safety Officer prior to use in the construction…
Read articleTYPES OF MAGNETIC MATERIALS All materials are affected by magnetic fields. Matter is made up of atoms with a positively charged nucleus surrounded by…
Read articleLONGITUDINAL MAGNETIZATION TYPES Electrical current can be used to create a longitudinal magnetic field in magnetic materials. When electric current is passed through a…
Read articleCircular magnetization is a non-destructive testing technique commonly used to detect surface and near-surface defects in ferromagnetic materials. It involves inducing a magnetic field…
Read articleAny factor that affects the formation of indications at a discontinuity affects the sensitivity of magnetic particle testing. Two of the most important of…
Read articleWHAT IS CIRCULAR MAGNETIZATION Circular magnetization is used for the detection of radial discontinuities around edges of holes or openings in test objects. It…
Read articleField Direction The proper orientation of the magnetic field in the test object in relation to the direction of the discontinuity is a more…
Read article
