JOB SAFETY ANALYSIS FOR ERECTION STEEL STRUCTURE
SAFETY EQUIPMENT & PRECAUTIONS REQUIRED: • Personal Protective Equipment (PPE) • Conduct safety meeting with the execution team the condition with the required precaution…
Read articlePakTechPoint
Browse 1959 free articles, standards and practical guides about PakTechPoint.
1,959 articles in this topic
Detector Installation for Vapour and liquid hydrocarbons
1) EQUIPMENT AIM : To detect the presence of combustible gas in the air or the presence of layers of liquid hydrocarbons. 2) STANDARDS OF…
Read articleVapour and Liquid Hydrocarbon Detection System
Purpose: To define and provide installation rules for vapour and liquid detection for liquid hydrocarbon terminals. Ethanol and FAME (these products are considered as…
Read articleAdvertisement
Job Safety Analysis for General Work in Building, Plant or Refinery
Description Task Hazard/Potential Incident Control Measure General work 1. Dust 2. Noise 3. Ground water 1.1 Suitable PPE should be permitted using. 2.1 Use…
Read articlePIPING SUPPORT INSTALLATION PROCEDURE | METHOD STATEMENT
PURPOSE SCOPE APPLICABLE DOCUMENTS RESPONSIBILITY MANPOWER TOOLS & EQUIPMENT METHODS / PROCEDURES QUALITY CONTROL SAFETY PRECAUTION Construction Material Requisition (CMR). Daily Weld Inspection Report…
Read articleJob Safety Analysis for Piping Support Installation
Steps Required to Complete Task Identify Hazard & Assess Risk Controls to Eliminate/Reduce Risk Mobilize men and equipments. 1.1 Mobilize men and equipment. 1.2 Use of defective tools…
Read articleProcedure Tightening of High Strength Bolted Connections For Structural Steel
PURPOSE SCOPE REFERENCES EQUIPMENT & TOOLS METHODS / PROCEDURE RESPONSIBILITIES ATTACHMENT 1.0 PURPOSE This Procedure or Method Statement shall provide minimum guidelines to carry…
Read articleMETHOD STATEMENT FOR GROUTING (NON-SHRINK)
PURPOSE SCOPE REFERENCE RESPONSIBILITIES PROCEDURE ATTACHMENT 1.0 PURPOSE The purpose of this procedure is to provide the work methods, guidelines, and quality requirements for…
Read articleJOB SAFETY ANALYSIS & RISK ASSESSMENT FOR GROUTING (NON-SHRINK)
DESCRIPTION OF JOB/TASK: Grouting under base plates of equipment and structural support foundations. SAFETY EQUIPMENT & PRECAUTIONS REQUIRED: • Personal Protective Equipment (PPE) •…
Read articleMethod Statement for Anchor Bolt Installation
1. PURPOSE 2. SCOPE 3. REFERENCE 4. RESPONSIBILITIES 5. PROCEDURE 6. ATTACHMENT 1.0 PURPOSE The purpose of this procedure is to provide the work…
Read articleJob Safety Analysis for Anchor Bolt Installation
SAFETY EQUIPMENT & PRECAUTIONS REQUIRED FOR ANCHOR BOLT INSTALLATION: • Personal Protective Equipment (PPE) • Conduct safety meeting with the execution team the condition…
Read articlePIPING ABOVE GROUND INSTALLATION WORK PROCEDURE | METHOD STATEMENT
1.0 PURPOSE 1.1. This work procedure and method statement shall provide minimum guidelines to carry out the Aboveground Piping Installation Works activities for piping…
Read article