Steel Structure Activities Work Installation | Method Statement
1.0 PURPOSE 1.1 This method statement shall provide minimum guidelines to carry out the modification works for steel structure activities for commercial buildings, plants…
Read articleSTRUCTURAL
Browse 28 free articles, standards and practical guides about STRUCTURAL.
28 articles in this topic
Gratings Erection Procedure | Method Statement
1.0 PURPOSE 2.0 SCOPE 3.0 APPLICABLE DOCUMENTS 4.0 RESPONSIBILITY 5.0 MANPOWER 6.0 TOOLS AND EQUIPMENT 7.0 METHODS/PROCEDURE 8.0 QUALITY CONTROL 9.0 SAFETY PRECAUTION 10.0…
Read articleErection of Platforms and Access Ways (Miscellaneous Steel Structure)
PURPOSE SCOPE REFERENCES RESPONSIBILITIES PROCEDURE INSPECTION AND TESTING SAFETY PRECAUTION ATTACHMENT 1.0 PURPOSE The purpose of this document is to establish and provide detailed…
Read articleAdvertisement
ERECTION STEEL STRUCTURE PROCEDURE | METHOD STATEMENT
1.0 PURPOSE 2.0 SCOPE 3.0 APPLICABLE DOCUMENTS 4.0 RESPONSIBILITY 5.0 SAFETY PRECAUTION 6.0 MANPOWER 7.0 TOOLS & EQUIPMENT 8.0 METHODS! PROCEDURES 9.0 QUALITY CONTROL…
Read articleConcrete and Foundations Specification | Concrete Placement Requirements
This article is about specification and requirements for concrete and foundation for any civil projects. Contractor shall submit proposed concrete design mix to client…
Read article
Reinforcing Steel Specification | Reinforcing Bars Procedures
1. Purpose This Article is about specification of reinforcing steel and defines the minimum requirements for material, detailing, installation, and inspection of reinforcing steel.…
Read article
Erection of Module Structure
Preparatory works Lifting study shall be conducted prior to set any structures. For required cases use only approved lifting plan. Prepare lifting location where…
Read article
TYPICAL RIG PLAN OF MODULE STRUCTURE | RIGGING PROCEDURE
In this article we are going to discuss steps for rigging procedure and module structure typical rig plan. RIGGING PROCEDURE: 1. CRANE SHALL POSITION…
Read article
Erection Of Piperack Procedure | Method Statement
General Preparatory works for pipework erection. First Confirm the turnover of civil works foundation/pedestals form for the installation of pipe racks. Secure necessary work…
Read articleASCE 7-95 Minimum Design Loads for Buildings and Other Structures
Reference Material form ASCE 7-95 Minimum Design Loads for Buildings and Other Structures. ASCE 7-95 Minimum Design Loads for Buildings and Other Structures FIGURE…
Read articleWind Load Analysis Examples
Example 1: Determine the wind loading on the main wind force resisting frame for an enclosed building. See Figure 3 below. For this example,…
Read articleMWFRS for Structures Other Than Enclosed Buildings
This article is about Main Wind-Force Resisting Systems for Structures Other Than Enclosed Buildings and all calculation of MWFRS. Force coefficients (Cf), in Table…
Read article